SUL801 ip67 ultrasonic level sensor ultrasic level transmitter long distance ultrasonic water level sensor

Ultrasonic sensor

Low power-sensor

Middle power-sensor

Large power-sensor

The Max. range

≤5m

≤7m

≤10m

≤10m

≤12m

≤15m

Blind area
Power supply

Standard: 300mm

350mm

500mm

500mm

600mm

800mm

OEM:200mm

/

/

/

Standard: DC24V

DC24V

DC24V

DC24V

DC24V

DC24V

OEM: DC12V

OEM: DC12V

/

OEM:DC12V

/

/

Beam angle

15°

12°

9°

Operating frequency

38K±10Khz

55K±10Khz

40K±5Khz

Accuracy

Standard: ±0.5%F S or ±5mm (at 25°C, Absolutely flat target under the condition of standard)

OEM: FS≤1m, accuracy can be ±1mm FS≤2m, accuracy can be ±3mm FS≤15m, accuracy can be ±0.25% FS Above OEM not available for two
wire system

Output signal

Standard: 4-20mA (3 wires)

OEM: 4-20mA(4 wires), 0-20mA, 0-5v, 1-5v
0-10v, 1-10v (both signal can not be customized DC12v)
RS485(MCU protocol as default, Address=01, bps=9600) 4-20mA+RS485; 1-5V+RS485, 1~2NPN
1-10V, 0-10V, 4-20mA(two wire) - Power supply 24VDC can not be OEM

Measuring mode

Standard: Distance mode, the distance of ultrasonic sensor surface to measuring target surface

OEM: Level mode; the distance of level surface to level bottom(the bottom of tank) NOTE: Ensuring the distance of sensor surface
to the level bottom is the actual mounting height, otherwise might be have installation error.

Working temp.

Standard: 0~50°C

OEM: Negative Temp. -10°C,-20°C,-30°C; Positive Temp. 60°C,70°C,80°C

Wiring Mode

Waterproof connect port, down-lead 0.5m(length can be customized)

Installation

Screw type or sifter clamping ; screw size: M68*2.0mm

Protection class

IP65, OEM of IP66, IP67, IP68

Working environment

Normal pressure, non-explosion-proof; non-corrosive environment

OEM: Anti-explosion symbol Exia II AT3 (DC12 V,range≤10m ) The material sensor housing: PTFE for large power sensor Strong in
corrosion resistance

Notes

1.When level range ≥15m, equip with other type ultrasonic sensors
2.Users no need to set the address, bps, installation height, so please verify to factory before ordering
3.For RS485-PC product, users can adjust the parameter by software(the default software)
The max measure range depends on the smooth level surface, so please confirm the real using environment and level surface when
ordering.