SUGON 8610DX HOT AIR REWORK SMD MACHINE, Lead free Soldering 1000W Hot Air Gun Rework Station

SUGON 8610DX HOT AIR REWORK SMD MACHINE, Lead free Soldering 1000W Hot Air Gun Rework Station

Product Features:

1. It has CH1, CH2, CH3 three working channels , and each channel can be set to the amount of wind , and temperature.
2. With multiple protection functions and key functions.
3. To facilitate real-time operation , with a magnetic switch control lever is placed in the handle holder immediately into hibernation .
4. With automatic sleep function , in a dormant state parameters can be set .
5. Sensor closed loop, microcomputer zero trigger temperature control, power, heating quickly , easily and precisely adjust the temperature stable , free from the influence of wind .
6. vortex brushless fans, air flow adjustable , wide range , can be adapted to a variety of uses .
7. The system has an automatic cooling function of wind capacity , extend the life of the heating element and protect the hot air handle.
8 Real ℃/℉ temperature display function.
9. SUGON 8610DX has a temperature calibration function.

Applications:
1. Suitable for dismantling and soldering a variety of components such as SOIC, CHIP, QFP, PLCC and BGA, etc.
2. Suitable for thermal shrinkage, baking, paint removal, adhesive removal, unfreezing, pre-heating, sterilization and plastic soldering, etc.
3. Adjustable air volume extends its applicable range to applications requiring small or large air volume.
4. Suitable for lead-free hot air de-soldering applications.

Note:
Conversion temperature unit
During use, press the "Multi-function button" to use the heat Grade "℃ & larr; ℉" or "℉ & larr; ℃".

Configuration buzzer
During use, press and hold the "Multi-function Button" for two seconds to turn off Turn the buzzer sound on or off.

Temperature calibration setting
When the host is powered off, press and hold the "Multi-Function Button" for two seconds and press
Turn on the power switch to enter the temperature calibration setting status interface, press the air volume
+ -Key to set correction temperature, after setting, click "more
Function key "exits the temperature calibration function and enters the operating state.