ADSL2+ |
||
Standards
|
ITU G.992.1(G.dmt), ITU G.992.2(G.lite), ITU G.994.1(G.hs), ANSI T1.413 issue #2, ITU G.992.5(ADSL2+)Annex L |
|
Up channel rate |
0~1.2Mbps |
|
Down channel rate |
0~24Mbps |
|
Up/Down attenuation |
0~63.5dB |
|
Up/Down noise margin |
0~32dB |
|
Output power |
Available |
|
Error test |
CRC, FEC, HEC, OCD, LCD |
|
Display DSL connect mode |
Available |
|
Display channel bit map |
Available |
|
ADSL |
||
Standards |
ITU G.992.1 (G.dmt) ITU G.992.2(G.lite) ITU G.994.1(G.hs) ANSI T1.413 Issue # 2 |
|
Up channel rate |
0~1Mbps |
|
Down channel rate |
0~8Mbps |
|
Up/Down attenuation |
0~63.5dB |
|
Up/Down noise margin |
0~32dB |
|
Output power |
Available |
|
Error test |
CRC, FEC, HEC, OCD, LCD |
|
Display DSL connect mode |
Available |
|
Display channel bit map |
Available |
|
VDSL2 |
||
Be compatible with ADSL2+, ADSL standard. |
||
DSL line attenuation |
||
DSL line noise margin |
||
DSL line up/down channel speed (Inter/Fast mode) |
||
DSL line up/down maximum rate |
||
DMT sub channel bit number: 0~15, and each sub channel frequency points |
||
DSL line error number (CRC, HEC, FEC, LCD, OCD) |
||
DSL line local output power |
||
DSLAM information |
||
Error Code Second |
||
Impulse Noise Protection (INP) |
||
Support 7 VDSL2 profiles: profile 8a, 8b, 8c, 8d, 12a, 12b, 17a, 30a,35b |
||
G.FAST |
||
Be compatible with ITU-T G. 9700/G.9701 (G.FAST) VDSL2, ADSL2+, ADSL standard. |
||
DSL line attenuation |
||
DSL line noise margin |
||
DSL line up/down channel speed (Inter/Fast mode) |
||
DSL line up/down maximum rate |
||
DMT sub channel bit number: 0~15, and each sub channel frequency points |
||
DSL line error number (CRC, HEC, FEC, LCD, OCD) |
||
DSL line local output power |
||
DSL information: lost signal, link closed |
||
Error Code Second |
||
SNR channel chart |
||
Support Hlog and QLN |
||
Impulse Noise Protection (INP) |
||
Support 9 VDSL2 profiles: profile 8a, 8b, 8c, 8d, 12a, 12b, 17a,30a,35b |
||
Support VDSL2 Vectoring (35b) |
||
DMM Test |
||
DC voltage (V): |
0~400 |
|
AC voltage (V): |
0~400 |
|
Loop resistance(Ω): |
0~20000 |
|
Capacitance (nF): |
0~1000 |
|
Insulation resistance (MΩ): |
0~50 |
|
General Specification |
||
Power supply |
Internal Rechargeable 2000mAH Li-ion battery |
|
Battery Duration |
4 to 5 hours |
|
Working temperature |
0-40 oC |
|
Working moisture |
5%-90% |
|
Dimensions |
180mm×93mm×48mm |
|
Weight: |
<0.5kg |
Key Feature
1.Test objects: ADSL; ADSL2; ADSL2+; READSL; VDSL2 up to 35b, G.Fast
2.Support Annex A or Annex B, Annex L, Annex M
3.Fast Copper tests with DMM (ACV, DCV, Loop and Insulation Resistance, Capacitance, Distance)
4.Supports Modem emulation and simulating login to Internet
5.Supports ISP login (username / password) and IP Ping test (WAN PING Test, LAN PING Test)
6.Supports all multi-protocol, PPPoE / PPPoA (LLC or VC-MUX)
7.Connects to CO via alligator clip or RJ11
8.Rechargeable Li-ion Battery
9.Beep and LEDs alarm indications (Lower Power, PPP, LAN,xDSL)
10.Data memory fuction
11.LCD display, Menu operation
12.Auto shut off if no any operation on keyboard
13.Compliant with all known DSLAMs
14.Software management
15.Simple, portable and money-saved
Functions
1.DSL Physical layer test
2.Modem Emulation (Replace the user Modem completely)
3.PPPoE Dialing (RFC1683,RFC2684,RFC2516)
4.PPPoA Dialing (RFC2364)
5.Telephone Function
6.DMM Test
7.Ping Function (WAN & LAN)
8.Data upload to computer and software management
9.Setup system parameter: backlight time, shut off automatically time without operation, press tone,
10.Revise PPPoE / PPPoA dial attribute, user name and password; restore factory value and so on.
11.Check dangerous voltage
12.Four grades service judge(Excellent, Good, OK, Poor)