1. When using the tube press for the first time, it should be crimped 20-30 times without load, and it can be used after observing that all parts are normal. 2. When using the pipe press in winter, it should be withheld 20-30 times without load to increase the oil temperature.
3. Press the open button, after the mold base is opened, select the corresponding mold to install on the mold base according to the specifications of the hose to be crimped, and adjust the micrometer scale.
4. Place the hose with the joint in the proper position in the press head so that the entire length is crimped at one time.
5. Press the crimp button to execute the crimping operation until the crimping head stops crimping and automatically opens the mold.
6. Take out the crimped hose assembly, use a vernier caliper to check the outer diameter of the crimped joint jacket. If it does not match the parameter table, fine-tune the micrometer scale until the next hose crimp meets the requirements.