SP100B spirometer lung function testing device portable spirometer price

Brief Introduction
Introduction
The Spirometer is a portable device for testing pulmonary function, it adopts differential pressure acquisition principle to measure over 100 parameters related to FVC, VC, MVV and MV functions. It can be used in many scenarios, such as hospital, clinic, family, MVV and provocation test before / after medication, etc. which can provide the test results of pulmonary function for the users and the basis for the medical staff to make diagnosis.
Function
1) Differential pressure detection technology, with a professional lung function software, which can measure over 100 parameters related to FVC, VC, MVV and MV functions.
2) Measure inspiratory and expiratory parameters, real-time curve display.
3) BTPS correction function, measure temperature, humidity and barometric pressure automatically.
4) Quality control function, automatic QC rating.
5) Calibration control function: volume calibration, three flows verification.
6) Display the optimal value from many measurements.
7) The tester condition can be reflected by the ratio of the measured value and the predicted value.
8) Flow-volume and volume-time curve
9) Data memory, delete and information review functions.
10) Trend chart display.
11) Prompt functions for over-limit of volume and flow.
12) Rechargeable lithium battery, with charging prompt.
13) Battery power indication.
14) Built-in multiple predicted values.
15) Support bronchial dilation / provocation test.
16) Pulmonary function assessment.
17) Follow-up questionnaires function.
18) Patient information can be entered, managed and queried.
19) The test report can be printed and output by the built-in 210mm thermal printer.
20) The external printer can be connected to print and output the test report.
21) 10.1" capacitive touch screen.
22) Wi-Fi function.
23) Built-in ID card reader (optional).
Performance
Display mode: 10.1" color LCD
Display resolution: 1280 * 800
Volume range: 0 L ~ 10 L (BTPS)
Volume accuracy: ± 3 % or ± 0.05 L (whichever is greater)
Flow range: 0 L/s ~ 16 L/s (BTPS)
Flow accuracy: ± 5 % or ± 0.17 L /s (whichever is greater)
Power consumption: P ≤ 150 V·A
Power supply: DC 14.8 V rechargeable lithium battery or AC220V 50Hz
Safety class: class I or internally powered equipment, type BF applied part
Accessories
A pulmonary function probe
A User Manual
100 mouthpieces (round: 50, flat: 50)
A cord set
A recording paper
An earth line
A nose clip (optional)
Physical characteristic
Dimension: 340 mm (L) × 320 mm (W) × 86 mm (H)
Weight: about 4000 g
Environment requirements
Operating environment
Temperature: + 10 ℃ ~ + 40 ℃
Relative humidity: 25 % ~ 80 %
Atmospheric pressure: 700 hPa ~ l060 hPa
Specific EMC, climate, mechanical environment:
1. Please use the device within the required altitude, temperature and humidity range. When the device is carried from cold environment to warm or humid environment, please do not use it immediately.
2. Do not use the device in environment with strong electromagnetic interference, direct breeze source, cold source or hot source.
Storage environment:
Temperature: - 20 ℃ ~ + 55 ℃
Relative humidity: ≤ 95 %
Atmospheric pressure: 500 hPa ~ l060 hPa
Specific EMC, climate, mechanical environment: the packed device should be stored in room with no corrosive gases and good ventilation. Temperature: - 20 ℃ ~ +55℃, relative humidity: ≤ 95 %. During transport, avoid strong shock, vibration and splashing with rain or snow.
Certification
No.
Selling points analysis
Features
Ø Beautiful appearance, concise and fashion.
Ø Desktop design, firm and convenient to operate.
Ø 10.1" capacitive touch screen.
Ø Measure over 100 parameters related to FVC, VC, MVV and MV functions.
Key selling points
Ø The test report can be printed and output by the built-in 210mm thermal printer.
Ø Wi-Fi function.
Ø Built-in ID card reader (optional).
Ø With the functions of QC rating, calibration verification, bronchial dilation or provocation test, pulmonary function
assessment, follow-up questionnaires, etc.
Ø Patient information can be entered, the predicted value can be calculated by the internal formula, and the ratio of the measured
value and the predicted value can be calculated. Several predicted value formulas are optional.