SP Racing F3 EVO Brush flight Controller PDB W/ Self Quadcopter AIO Frame

SP Racing F3 EVO Brush flight Controller PDB W/ Self Quadcopter AIO Frame

Features
1. Pefectly support 1-2S lipo, it can even bring you an extremely fast and fun flying experience with a 2S battery.
2. Support SPEKTRUM (DSM2/X), PPM, SBUS and other mainstream receiver, no need to connect the external inverter which has been pre built-in.
3. Integrated with 4 current NMOSFET, each current can reach at least 10A and each motor has free-wheeling diode.
4. Come siwht the battery voltage detector and the buzzer interface. Customers can set the voltage alarm randomly.
5. Uses STM32 F303CCT6 as the main controller and MPU6500 of InvenSense Gyro.
6. Support Cleanflight and Betaflight software.
7. This can be also used as a frame.
8. With 4 LED light, has LED strip function.

Product Details

ARRIS 95mm F3 EVO Brush board is revised on the basis of SPRacing F3 EVO. It is a FC-frame using ARM Cortex M4 core STM32 F3 processor. Support Spektrum (DSM2/X), PPM, SBUS and other mainstream receivers. Also it is support cleanflight and betaflihgt software.
Specification:
Wheelbase: 95mm
Weight: 8.5g
Flight controller: SP RACING F3_EVO_Brush
Firmware version: betaflight 3.0

Item Packing
1 x ARRIS F3 EVO Brush Flight controller / Frame
1 x Accessories Set

Recommend Building:
Motor: 7520-8520 Brush Motor
Propeller Size: 55mm
Camera: 520TVL HD CMOS 1/4 inch Camera
AV Wireless Transmitter: 5.8g 25mw 32ch
Batterry: 3.7V 600mah 25C Lipo battery
Flight time: 5-6 minutes
Camera: 520TVL HD CMOS 1/4 inch Camera
Video Output format: PAL / NTSC
AV Wireless Transmitter: 5.8g 25mw 32ch
Batterry: 3.7V 600mah Lipo battery
Flight time: 6 minutes
With LED Strip function

Detailed Images