Specification | ||
Maximum circuit board area: | 400*200 mm | |
Number of mounting heads: | 4 | |
Maximum movement range of Z axis: | 20 mm | |
Maximum mounting rate: | 9,500 PCS/hour | |
Average mounting rate: | 8,000 PCS/hour | |
Positioning accuracy: | 0.01 mm | |
Buffering range of suction nozzle: | 4.5 mm | |
Power supply: | 220V/110V, 50 Hz | |
Compressed air: | 0.6-0.7 Mpa | |
Average power: | 400 W | |
Recognition Mode: | Four Heads Synchronized Recognition | |
Number of cameras: | a Mark camera, four high-speed cameras, a high-definition camera | |
Product weight: | 210KG | |
PCB access mode: | automatic Left-in and right-out access, supporting left-right device connection function | |
Quantity of trays: | Up to 48 non-feeder feeding components are supported, each of which can specify its coordinates within the mounting range. | |
Complex speed to mount resistance and Chip: | 6000/h | |
Mounting accuracy range: | 0201-40*40mm,Pin spacing 0.3mm | |
Chip(Matching which support electric feeder can mount the 0402,0201) | ||
Quantity of feeders: | 50 PCS | |
Service motor: | Panasonic servo motor | |
Guide rail: | Taiwan TBI Linear Guide rail | |
Driving mode: | Taiwan TBI ball screw | |
Nozzle Vacuum Source: | Japan CKD High Speed On-off Vacuum Generator with Vacuum Damage | |
Minimum air capacity of pump: | 80-120 L/min, volume more than 60 L | |
Gas quality requirements: | oil-water separation device, dust filter device, air pressure stabilization device | |
Dimension: | 900×1140×900mm |