SMD Component Counter / SMD Component Counting Machine

Product introduction

1: Accurate leak rate: 99%, the accuracy rate and the material transmission belt, adjust the height of the optical fiber, with magnification settings.

2: If there is an empty material, it will stop automatically and beeps by the buzzer, and the number of leaks will be displayed on the display

3: Different width of the belt needs to adjust the height of the optical fiber

4: Fiber modal:Japan KEYENCE Radial optical type optical fiber amplifier, Amplifier model: FS2-60.

5: Transparent material can count but cannot leak.

Product Functions:

1.Automatic counting of disc loading

2.The number of components that can be preset is automatically counted

3.Can detect empty material (non transparent material belt)

4.Can set a certain number into the machine and it will stop once it has counted that number of parts.

5. If there is a cut between components, you just use splice tape to connect the two ends of components, and then it can pass our SMD Component Counter smoothly.

Application Range

1. Full automatic part counter IQC feed inspection;

2. Parts counter used in electronic material production, material preparation;

3. Parts counter material belt packaging count and leak inspection;

4. The working of the part counter is very convenient.

5. Parts counter inventory management and other operations;

6. Strip type patch electronic components (resistance, capacitance, diode, audion, IC, etc.);

7. Two element spacing in material belt: 2, 4, 8, 12, 16, 20, 24, 28, 32, 36, 40, 44, 48, 52, 56mm;

8. Disc diameter: any size can be applied.

9. Disc width: 8, 12, 16, 24, 32, 44, 56mm;

Suitable industries include: electronic products manufacturer, SMT processing plant (SMT generation plant), EMS professional electronic manufacturing service factory, SMD parts manufacturer, SMD parts supplier, parts counter, coil and tape packaging manufacturer, and other electronic related peripheral manufacturing industries.