SL11 Single light controller 0-10V dimming street light node controller

Name: Street light node controller

Model: SL11

Summarization

Streetlights centralized manager is our company new street light control system, adopt the most advanced Zigbee wireless technology, combined with GPRS technology, WIFI technology, and embedded system, in the view of the present situation of LED street light control system and the actual demand of energy saving and accurate control, then put forward wireless network, single point control, multipoint control solutions, it can long-range control single light switch, dimming, detection and other functions. Built-in multiple strategies, realize independent operation, ensure when the wireless communication breakdown, it also can switch on/off the light. With easy to implement, no need to wiring, strong anti-interference, expansion and so on features. And in the aspect of the client side uses a variety of ways: mobile phone, tablet, computer, convenient for different person timely control street light important data.

Technical parameters

Single light controller:

1.Working temperature: -20-60℃

2.Wireless frequency: 2.4G ISM Global free channel(ZigBee)

3.Network type: star network, mesh network(MESH)

4.Network capacity: 100 network nodes

5.Transmission distance: 200m

6.Input power supply: AC 90~260V 50Hz/60Hz

7.Output power supply: AC 90~260V 50Hz/60Hz

8.Main function: switching, dimming, temperature, power detection and other functions on the street lights

9.External dimension: L141.02ΧW63.30ΧH38.00mm

10.The maximum output power:

SL11/SL21: 1300W/ch

SL12/SL22: 200W/ch

11.Net weight: 359g

12.Gross weight: 449g

13.Static power consumption: <3.0W

External dimension(mm)

Direction for use:

Connect the load wire at first, following by the power wire, after controller start success, load light will gradually bright, after reaching the highest brightness, load light will continuous flash 5 times, then self-test completed.

Binding instruction:

Streetlight node controller must binding with the centralized manager first, then it can do switching, dimming, temperature acquisition such operation to load light, thus before use, it need to binding with centralized manager first.

Binding methods: street light node controller beside with a button, long press the button for 5 seconds, the green light flashing fast, means enter into binding state, after set the lamp post number and controller number in the binding node of centralized manager, choose the binding, after the success of binding, the LCD screen will show "successful". At this time the street light node controller green indicator will recovery flash slow, means binding complete.

Red indicator light shows the situation of group network. Flash means the node controller has grouped network and can work regularly. Normally on means it fails to group network and needs to bind with the centralized manager.

Wiring instruction

Two core wire: Red L, black N connect AC220V the power input line.

Four core wire: power output and 0-10V signal line, Green L, Blue N, connect the power supply port of load lamp;

Red: positive pole of 0-10V, White: 0-10V negative pole, connect the power supply port of load lamp;

Typical application:

Note:

1.Do not dismantle this equipment to avoid electric shock hazard.

2. Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power.

3. Please make sure the telephone charge is enough before you control it by GPRS.

Packing: 1 set in antistatic bag or blister pack and put in box

1.External dimension :L72ΧW38ΧH28 mm

2.Packing size :L50ΧW35ΧH22 mm

3.Net weight : 40g

4.Gross weight: 60g

Shipping: DHL, FED EX, UPS, EMS, China Post, etc,.

Trade terms/Services:

1.Paypal and western union for small orders and bank transfer TT in advance.

2.No MOQ set for sample order.

3.Lead time: 3-7 days for sample order,10 to 15 days after large order

4.Shipping freight are quoted under your requests.

5.Shipping Port: Shenzhen, China

6.Discounts are offered based on order quantities

7. Your inquiy related to our products or prices will be replied in 24hrs

8. Protection of your sales area, ideas of design and all you provide information

9. Good before and after sales service.

About us:

1. Expertise: High quality LED and EL products.

2. Competent R&D team and quality control.

3. Accomodate large order quantity.

4. OEM accepted.

3. Markets: Europe,USA and Asia.

4. Certificates: CE and RoHS

 Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.

Q4. How about your delivery time?
A: Generally, it will take 1-5 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.