SK-10 pneumatic concrete chipping tools/bits and rods

Features

SK-10 pneumatic concrete chipping tools for mine is hand-held pneumatic tools, with compressed air to promote the reciprocating piston movement, so pick head constantly hit SK-10-type gas-ho for mining, road and so on. RB777 pneumatic stone drill pick for mine consists of a valve mechanism, an impact mechanism, and a drill rod. The impact mechanism is a thick-walled cylinder having an impact hammer reciprocable along the inner wall of the cylinder. The tail of the SK-10 air pick is inserted into the front of the cylinder, and the rear end of the cylinder is equipped with a valve box. There are many longitudinal air holes around the cylinder wall, and the spring of the compression plunger valve is connected to the air passage. The SK-10 type gas hopper is equipped with a gas valve at one end, pushing the handle sleeve and the other end into the cylinder, Of the length of the hammer according to the movement requirements of the configuration in order to take turns into the air or exhaust, plunger valve in the coil spring under the action of the cut-off gas in the normally closed state. So that the hammer in the cylinder within the regular reciprocating motion. When the impact hammer moves backwards, the gas inside the cylinder is enclosed in the valve box, forming a flexible cushion layer. The gas inside the cylinder is enclosed in the gas cylinder of the SK-10 air hammer impacting hammer in forward movement. Distribution valve box, to be re-gas with the forward impact. Hammer against the end of the drill; impact hammer backwards movement, the pick of the starter device located in the handle sleeve. In between the inlet and outlet valves with a plunger valve control gas path, the plunger valve in the coil spring under the action of the gas cut off the normally closed state. When the picks work, so that the drill bar to withstand the construction surface, the other end into the cylinder, push the handle sleeve, compression piston valve spring connected to the airway, surrounded by a number of longitudinal cylinder wall, with valve Then automatically with gas, the rear end of the cylinder equipped with valve box. So that impact hammer constantly reciprocating movement, the fight against drill tail, broken construction body. Pneumatic pick is a handheld device, equipped with pneumatic pick by the valve body, the impact of institutions and the hammer.

 SK-10 pneumatic concrete chipping tools

Specification

Model: SK-10

N.W: 10 kg

Length: 498 mm

Percussive Energy: 45 J

Percussive Frequency: 21 Hz

Air Consumption: 17 L/S

Air Tube Inner Diameter: 19 mm

Bit Head Size: 24x70 mm

Drill Pick Fix Method: threaded card sets

Hammer Diameter: 38 mm

Our service

1. Response within 24 hours , action within 48 hours by email or calls

2. Warranty for 1 year, spare parts accessories optional

3. Provide perfect spare parts and accessories service and support

FAQ

1. OEM is available?

Yes, we can put your logo on the machine if needed.

2. May I know the Lead time?

The lead time of our machine is 5 to 10 workdays.

3. Can you provide the whole rock drill/jack hammer equipments?

Yes. we offer hand held rock drill, pneumatic air leg rock drill, SK-10 pneumatic concrete chipping tools.

4. Are you a factory?

We are a professional manufacturer of rock drill equipment since 2002.

Factory

Warehouse

Packing