1. Potentiometer type sensor or hall sensors | ||
2. Uniaxial or biaxial control | ||
3. High strength control lever and the proportion of excellent control or switch output | ||
4. Panel above protection grade IP64 | ||
5. Easy installation, flexible operation, uniform hand feeling, long service life, maintenance free |
Environment Specifications | ||||||||
Storage temperature | normal temperature | |||||||
Operating temperature | —25℃~+80℃ | |||||||
Installation of flange protection grade | IP65 | |||||||
Vibration | amplitude of vibration ±3g, frequency 10HZ-200HZ | |||||||
Shock | 20g, 6ms, half sine type | |||||||
EMC anti-interference grade | 150KHZ-30MHZ, grade B, satisfy EN 50081-2 (1993) standards | |||||||
ESD anti-interference grade | Level 4, 8 kv contact discharge, 15 kv air discharge, satisfy IEC 61000-4-2 standards | |||||||
Mechanical Specifications | ||||||||
Mechanical rotation | ±32° (potentiometer) ±20° (hall sensor) | |||||||
Operating torque | 5N(50Nmax) | |||||||
Mechanical life | 5,000,000 cycle | |||||||
Mechanical tolerance | ±0.5° | |||||||
Electrical Parameters | ||||||||
Power supply voltage | 5±0.5VDC | |||||||
The power consumption of current | 6.5 mA/each hall chip | |||||||
Resolution | infinition | |||||||
Maximum voltage | 15 VDC continuous | |||||||
Reverse polarity maximum voltage | 14.5VDC | |||||||
The median voltage (no-load) | 48~52%Vs | |||||||
Load resistance | 5KΩ | |||||||
Power supply voltage | DC24V | |||||||
Power supply current | <20mA | |||||||
Resolution | Infinition | |||||||
Resistance (10%) | 2KΩ, 5KΩ, 10KΩ | |||||||
Electrical rotation | ±32° | |||||||
Output voltage range (Relative voltage) | 0~100%;10~90% | |||||||
Maximum voltage | 48%~52% | |||||||
Potentiometer maximum load of voltage | 32VDC | |||||||
Maximum power consumption (25 ℃) | 0.25W | |||||||
The direction of the switch | Switch position ±3° |