SIUI SUPOR-32P/32PT ultrasonic phased array and TOFD imaging flaw detector
Can be configured with phased array probes and wedges with 1M to 15M, and 16 to 128 elements from SIUI
Technical Parameter
General specification | |
Display | 8.4" TFT LCD screen, resolution 800*600 |
Panel | Character graphic silica gel plate |
Operation mode | Touch switch button, Jun fly knob, touch screen |
Chinese | Chinese (optional English, Russian, French, etc.) |
Unit | mm/inch |
Battery type | Intelligent lithium ion battery |
Battery capacity | 7.5Ah |
Battery voltage | 11.1V |
Battery quantity | 2pcs |
Battery working time | ≥3hours |
Adapter input | AC 100-240V 50Hz/60Hz |
Adapter output | DC15V |
Adapter power | 150W |
Instrument power | 70VA |
Data storage | 2G internal memory |
Input / Output | |
USB Interface | 2pcs |
Network interface | 1pcs |
Video output | 1pcs(VGA) |
Encoder interface | 1pcs(14 core) |
Alarm interface | 1pcs(25core) |
Wireless network(WIFI) | 1pcs(Antenna interface) |
Environmental rating | |
Working environment | 0℃~40℃ |
Storage environment | -20℃~60℃ |
SUPOR-32P/32PT Technical Parameter
System | ||
Imaging mode | General UT/TOFD | Phased array |
Channel number | 2 | 32 |
Probe interface type | LEMO 00 | Tyco |
Probe interface number | 4 | 1 |
Maximum number of probes | 4 | 128 element |
Pulse generator | ||
Pulse type | Negative square wave | Bipolar Fang Bo |
Impulse voltage | 50-500V, step to the minimum 1V | 2-110V, step to the minimum 2V |
Pulse width | 10-600ns, step to 10ns | |
Firing frequency | 2-10MHz, step to 1MHz | |
Pulse energy | 4 | |
Repetition frequency | 100-2000Hz, step to 100Hz | 100-8000Hz, step to 100Hz |
Damping | 4.(25/75/200/1000Ω) | |
Delay of pulse generator | 0-20µs, Resolution 5ns | |
Pulse generator focusing | Single point focusing | |
Receiver | ||
Broadband | 0.5-20MHz | 0.5-15MHz |
A/D sampling frequency | 200MHz | 100MHz |
Gain | 0-110dB, Stepping: 0.5/2/6/12 | 0-80dB, Stepping: 0.1/0.5/2/6/12 |
Receiver delay | 0-20µs, Resolution 2.5ns | |
Receiver focus | Maximum 1008 focal points per scan line | |
Detection mode | Forward / negative / Bi / RF wave | Forward / negative / Bi / video filtering |
Wave filter | 16. | 4. |
Inhibition | 0-80%, Stepping 1% | |
Gain adjustment | -5~+5dB, Stepping 1dB | |
Scanning | ||
Scanning type | A/TOFD | A/S/L/C/D |
Scanning group | Two groups: UT or TOFD | 6 groups: Phased array |
Guide | TOFD guide, DAC guide, angle calibration guide, automatic calibration guide | Scan guide, workpiece guide, sound speed / delay / sensitivity /TCG calibration guide |
Trigger mode | Time base / encoder | Time base / encoder |
Single sweep length | Max. 2m | Max. 5m |
Scan line number | Max. 512pcs | |
Scanning angle range | -89°~+89°,stepping 1° | |
Angular spacing | 0.1°~5°, stepping 0.1° | |
Focus position | 6-500mm, stepping 1mm | |
Detecting range | 0~1000mm, stepping Min.0.1mm | 0~1000mm, stepping Min.0.1mm |
Material sound velocity | 500-15000m/s, stepping Min. 1mm | 500-15000m/s, stepping Min. 1mm |
Display delay | 0-1000m/s, stepping Min. 0.1mm | |
Pulse displacement | 0-1000m/s, stepping Min. 0.1mm | |
Probe zero | 0-19.99µs, stepping Min.0.01µs | |
Probe front | 0-100mm, stepping Min. 0.1mm | |
Calibration / measurement | ||
Automatic calibration | Sound velocity, probe zero, probe angle | Sound velocity, delay, sensitivity, TCG, level zero |
Measuring point | Peak / front | Peak / forward /J frontier |
Measure | Double gate: measurable | Three gate: measurable |
echo amplitude, sound range, horizontal distance, vertical distance, distance between gates | echo amplitude, sound range, horizontal distance, vertical distance, distancebetween gates | |
Dual measurement cursor: the horizontal, vertical position and the distance between the measured images | ||
Gate | Gate up: full range | Gate up: full range |
Gate width: full range | Gate width: full range | |
Gate voltage: 10-90%, stepping 1% | Gate voltage: 10-90%, stepping 1% | |
Curve function | DAC (curve / line), Max. 6pcs | TCG, each scan line up to 6 |
Auxiliary function | Peak memory, AWS D1.1/D1.5, Automatic gain | Automatic gain |
Alarm | Sound alarm: incoming / lost wave | Sound alarm: incoming / lost wave |
Display measured value | 8 positions can be customized display | |
Data analysis | The direct wave / wave reflection straight, direct wave / ground wave filtering, image contrast, image gain adjustment, defect length and height measurement | Image mode switching, image gate dynamic reconfiguration |
Detection index | ||
Flaw detection sensitivity margin | ≥65dB,(2.5Z20N probe) | |
Linear time base | ≤0.5% | |
Vertical linearity | ≤3% | |
Amplitude linearity | ≤±2% | |
Attenuator precision | 20dB±1dB | |
Dynamic range | ≥32dB | |
Far zone resolution | ≥26dB | |
Equivalent input noise | ![]() |
Service
1. Pre-sale service
Freely provide project designing, process designing, choosing suitable equipment for you
2. Medium-sale service
Accompany you to complete the acceptance of the equipment,draft the construction scheme and detailed process, and complete process of export
3. After-sale service
The quality guarantee period of our machine is 12 months.
We will provide necessary information for your purchasing equipment and be very willing to answer all the problems you have concerned about the device
With the development of technology in our company, we will provide improved working state and information for you at any time.
Within the quality guarantee period, free parts replacement and corresponding service are available.
Beyond the quality guarantee period, we still provide widely and favorable technical support and spare parts supply.