SHANTUI brand new 28t Trash/Garbage/Waste Compactor SR28MR-3 landfill compactor for sale

SR28MR-3 Trash Compactor
SR28MR-3 trash compactor is a heavy-duty compacting machine with high unit linear load. The padfoot surfaces of the compacting drum are bead welded with special material to achieve strong wear and corrosion resistance. This machine mainly utilizes own weight to bulldoze, crush, and statically compact the trashes. This machine is applicable for the landfilling and leveling of various bulk trashes and can be used as landfill compactor and high-speed compactor

Technical Features
Shangchai C6121ZG16 water-cooled engine maintains the whole machine under best working status with strong power to ensure the compacting quality and high efficiency and energy-saving.
With professional design and precise manufacturing, the hydro-mechanically driven power drive system is specialized for severe trash treatment environment to provide stronger power, higher productivity, and lower unit hour operating cost.
The weight of the compactor is equally distributed on the axles, which applies a super-strong linear compacting force onto the compacting drum so that the compacting drum can not only complete the crushing and compacting of trashes, but also feature sufficient corrosion resistance.
The full-enclosed cab can protect the driver against the influence of severe working environment. The traveling of the machine is controlled by the single gearshift joystick and the steering of the machine is controlled by the steering wheel to effectively improve the operator’s working efficiency and relieve the fatigue.
The lifting of the blade is controlled by the mechanic connecting rods, featuring simple and practical operations. The comfortable and firm seat capable of longitudinal adjustment is equipped with left and right foldable armrests and retractable seat belt. The heating and air conditioning system is equipped to achieve higher operating comfort and efficiency.
The unique anti-winding device for the steel drum can prevent the winding of trashes on steel drum.
The optical monitors within the cab are the safety guarantee for frequent reversing operations of the compactor.
The exterior ROPS structure of the cab can guarantee the driver’s safety under extreme conditions.
Three-layer guard plates effectively guard all terminal reducer interfaces of front and rear axles against the ingress of foreign material and all guard plates are easily accessible and dismountable.
The overhead steering cylinder effectively eliminates the possibility of impact by the trashes.
The bottom of the compactor is under full-enclosed protection by baseplates to keep clean the machine to the maximum extent.
The cab adopts tilting structure and the rear hood adopts combination openable structure to promote the maintenance convenience.
The connection between blade and front frame adopts unique seat bolted cover and ball joint to ease the assembling, which can be easily replaced if being worn.

SHANTUI SR28MR-3 28Ton Landfill Compactors for sale
Operating weight(kg)	28000
Axle load,front(kg)	14000
Static linear load, Front/Rear	618/762
Working width(mm)	3520
Minimum turning radius(mm)	7250
Drum diameter(mm)	1700
Steering angle(°)	±36
Oscillating angle(°)	±8
Max. climbing ability(%)	100
Max.lifting height(mm)	1146
Max.cutting depth(mm)	150
Blade capacity(m3)	11
Wheel base(mm)	3500
Min.ground clearance(mm)	465
Forward speed(km/h)	4.37
	6.82
	10
Reverse speed(km/h)	4.37
	6.82
	-
Engine model:	Shangchai SCC11CB255G2B1
Rated power(kw)	187
Rated speed(rpm)	2200
Overall length(mm)	7930
Overall width(mm)	3660
Overall height(mm)	3960

Landfill Compactor Series:
SR23MR
SR26MR
SR28MR-3
QS300