SDM630-2T MID 3 Phase DIN Rail Dual Source Electric Energy meter for Electricity Board and Diesel Generator
Dual Source Measurement
SDM630-2T Dual Source Energy meter replaces 2 energy meters recording data from two different sources of energy. It provides two counters showing energy consumption on public electricity board (EB) and diesel generator ( DG).
SDM630-2T measures and displays the characteristics of single phase two wires (1p2w), three phase three wires (3p3w,) and three phase four wires(3p4w) supplies, including voltage, frequency, current, power ,active and reactive energy, imported or exported. Energy is measured in terms of kWh, kVArh. Maximum demand current can be measured over preset periods of up to 60 minutes.
SDM630-2T supports max. 100A direct connection, saves the cost and avoid the trouble to connect external CTs, giving the unit a cost-effective and easy operation. Built-in interfaces provides pulse and RS485 Modbus RTU outputs. Configuration is password protected.
Multi-parameter Measurements
Dual Source Measurement for Utility & Generator Monitoring
RS485 Modbus RTU
2 Pulse Outputs
Accuracy Class 0.5s /1.0
MID B+D Apporved
Single Phase & Three Phase Available
Electrical characteristics | ||||||
Type of measurement | RMS including harmonics on three phase AC system (3P, 3P+N) | |||||
Measurement accuracy | Power | IEC 61557-12 Class 0.5 | ||||
Active Energy | IEC 62053-22 Class 0.5S, IEC 61557-12 Class 0.5 | |||||
Reactive Energy | IEC62053-23 Class 2, IEC 61557-12 Class 2 | |||||
Frequency | ±0.1% | |||||
Current | ±0.2% | |||||
Voltage | ±0.2% | |||||
Power Factor | ±0.01 | |||||
Input-Voltage | Un | 3 x230 / 400 V ac | ||
3 x230 / 400 V ac | 80%~120% of Un | |||
Impedance | 1M Ω | |||
Frequency | 50Hz/60Hz | |||
Input- Current | Basic Current (Ib) | 10A | ||
Max Current | 100A | |||
Operational Current Range | 0.4% Ib~Imax | |||
Over current withstand | 30Imax for 0.01s | |||
Mechanical Characteristics | ||||||
Weight | 400g | |||||
IP Degree of Protection (IEC 60529) | IP51 front display | |||||
Mounting Position | Vertical | |||||
Panel Thickness | 1~5mm | |||||
Material of meter case | Self-extinguishing UL 94 V-0 | |||||
Mechanical environment | M1 | |||||
Environmental Characteristics | ||||||
Operating Temperature | -25 to 55°C | |||||
Storage Temperature | Storage Temperature | |||||
Humidity Rating | <95% RH at 50 °C (non-condensing) | |||||
Pollution Degree | 2 | |||||
Altitude | 2000m | |||||
Electromagnetic Compatibility | ||||||
Electrostatic Discharge | IEC 61000-4-2 | |||||
Immunity to Radiated Fields | IEC 61000-4-3 | |||||
Immunity to Fast Transients | IEC 61000-4-4 | |||||
Immunity to Impulse Waves | IEC 61000-4-5 | |||||
Conducted Immunity | IEC 61000-4-6 | |||||
Immunity to Magnetic Fields | IEC 61000-4-8 | |||||
Immunity to Voltage Dips | IEC 61000-4-11 | |||||
Radiated Emissions | EN55011 Class A | |||||
Conducted Emissions | EN55011 Class A | |||||
Radiated Emissions | IEC 61000-3-2 | |||||
Safety | ||||||
Measurement Category | Per IEC61010-1 , CAT III | |||||
Over voltage Category | CAT III | |||||
Protective Class | II | |||||
Communications | ||||||
Interface standard and protocol | RS485 and MODBUS RTU | |||||
Communication address | 1~247 | |||||
Transmission mode | Half duplex | |||||
Data type | Floating point | |||||
Transmission distance | 1000m Maximum | |||||
Parity | None (default), Odd, Even | |||||
Stop bits | 1 or 2 | |||||
Response time | <100 mS | |||||
Q 1:Do you have any MOQ?
A:Yes,MOQ is 100pcs.
Q 2:What is the lead time?
A:Sample time 1-3days,mass production 10~20days for order more than 500pcs
Q 3:Can we put our logo on Energy meters?If yes ,what you need from us?
A :Yes,we can achieve it by silkscreen ,laser etching ,full color etc. Need your logo Ai Format or EPS. OEM with your logo has additional charge. And MOQ for OME is 150pcs.
Q 4:Could you offer the sample even pre-production sample beforeI place the order?
A :We can offer samples to you after you place the order.
Q 5: If I do not like the color, could I change the color ?
A: All of our products we have standard colors like White or black, if you need special color, we could customized. The MOQ is 10000pcs.
Q 6:How should I pay for you if I place order to you?
A :Usually, the Payment terms Paypal ,T/T ,West Union could be accepted.30%deposit in advance,70% paid before the shipment.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier