Model | SCN-1200-12 | SCN-1200-15 | SCN-1200-24 | SCN-1200-48 | ||||
DC Voltage | 12V | 15V | 24V | 48V | ||||
Rated Current | 100A | 80A | 50A | 25A | ||||
Current Range | 0-100A | 0-80A | 0-50A | 0-25A | ||||
Rated Power | 1200W | 1200W | 1200W | 1200W | ||||
Ripple & Noise | 120mVp-p | 1500mVp-p | 240mVp-p | 480mVp-p | ||||
Voltage Adj. Range | 10~13.2V | 13.5~18V | 20~26.4V | 41~56V | ||||
Voltage Tolerance | ±1% | ±1% | ±1% | ±1% | ||||
Inlet Stability | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ||||
Load Stability | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ||||
Setup, Rise, Hold Up Time | 1.5s,50ms,20ms at full load | |||||||
INPUT | ||||||||
Voltage Range | 200-260VAC 47~63V | |||||||
AC Current | 11A/230VAC | |||||||
Efficiency | 83% | 85% | 85% | 87% | ||||
Inrush Current | 120A/230V | |||||||
Leakage Current | <3.5mA/240VAC | |||||||
PROTECTION | ||||||||
Over Load | Current limiting delay shutdown o/p voltage ,repower onto recover | |||||||
Over Temp. | TSW1 (Power transistor when temp>100℃ shut down O/P voltage re-power on to recover | |||||||
ENVIRONMENT | ||||||||
Working Temp., Humidity | -10℃~+65℃(Refer to output derating curve),20%~90%RH | |||||||
Storage Temp., Humidity | -20℃~+85℃, 10%~95%RH | |||||||
Temp. Coefficient | ±0.03%/℃(0~50℃) | |||||||
Vibration | 10~200Hz,2G 10min,/1cycle,Period for 60min,Each X.Y.X axes | |||||||
SAFETY | ||||||||
Withstand Voltage | I/P-O/P , I/P-F/G 1500VAC | |||||||
Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC | |||||||
STANDARD | ||||||||
Safety Standard | Meet UL1950requirement(Not apply for the mark) | |||||||
EMC Standard | CISPR22(EN55022),IEC1000-4,2,3,4,5,6,8,11 IEC1000-3-2 | |||||||
OTHERS | ||||||||
Dimension | 291*132*132mm(L*W*H) | |||||||
Weight | 5.0Kg |