SBS spray adhesive is widely used for sofa, foam, furniture, sponge, upholstery etc. Especially suitable for bonding the sofa form , not damage the foam and sponge. It is the first choice of general purpose and furniture manufacturing industry.
--It is recommended to make the application between +5℃ and +40℃. Surfaces must be clean and dry. Spreads evenly on surface of two joint material, after dries moderately, folds gathers with exerts pressure (for example spread 2~3 times for multi hole joint material).
--The application adhesive could be achieved after drying for 5-10mins at the room temperature of 25°C. The best adhesive performance is available after drying 24 hours.
Basis | : SBS rubber |
| ||
| Density | : 0.95±0.1 | g/ml |
|
| Solid Content | : ≥30±3 | % |
|
| Viscosity | : 2000±300 | Mpa.s |
|
| Initial adhesion shear strength | : ≥0.6 | Mpa |
|
| Initial adhesion peeling strength | : ≥0.5 | KN/m |
|
| Shear Strength (After 48 hours) | : ≥1.20 | Mpa |
|
| Peeling Strength (After 48hours) | : ≥1.95 | KN/m |
|
| Curing time | : 12-24 | hours |
|
| Temperature resistance | : 10℃~60℃ |
|
Description | Packing | Volume (m³) |
125ML | 48cans/ctn | 0.0155 |
250ML | 48cans/ctn | 0.023 |
500ML | 24cans/ctn | 0.026 |
1L | 12cans/ctn | 0.022 |
3L | 6cans/ctn | 0.03 |
5L | 4cans/ctn | 0.027 |
15L | 1cans/ctn | 0.0225 |
18 months under the temperature of 5-40°C .
Keep the tins seal after using.