SIM Card - Warburg USIM,2G/3G/4G/5G NSA 2FF/3FF/4FF(Nano)(3 cut),6PIN,5V/3V/1.8V,128K-1M- Suitable for terminal, chip, communication and network research and development, support software to card - maintenance for one year
specification
Commodity specification |
HUABAO S22 SIM SIMcard-USIM,2G/3G/4G/5G NSA/SA |
size |
2FF+3FF(micro)+4FF(nano) |
thickness |
0.67mm-0.72mm |
Operation and storage temperature |
-20℃~+85℃ |
humidity | The card can be used reliably when the relative air humidity is between 5% and 95% and the temperature is 25℃. |
light | The card and its printed contents shall be protected from changes due to light during normal use. |
Material | The material of the card shall not contain elements which are likely to infiltrate or alter the magnetic material so that during the normal course of use the card may become unfit for a set of characteristics specified in the identification card standard. |
Mechanical strength (clips and contacts) |
The card shall be resistant to damage to its surface and any of its components and shall be maintained in good condition during normal use, preservation and handling. Each contact surface and contact area (the entire conductive surface) shall not be damaged at a working pressure equivalent to 1.5N applied to a 1 mm diameter steel ball |
X-ray X | An exposure of 0.1Gy to either side of the card, equivalent to 70 -- 140 kV of medium energy X-rays (annual cumulative dose), should not cause the card to fail. |
resistance | The contact resistance of the card connecting parts can be determined and measured by a test card.The test card short-circuited between the internal contacts.When applying any DC current between 50μA and 300mA, the resistance measured between any two rows of contacts (two contacts in series) shall be less than 0.5 ohm.For an alternating current with a peak of 10mA and a frequency of 4MHz, the impedance should keep the voltage across this impedance below 10mV. |
electromagnetic field |
The exposure of the card to a magnetic field of 79.500A /m shall not cause failure of the integrated circuit, and the test shall be performed with a static magnetic field of the specified value. Warning: The magnetic field will erase the contents of the magnetic stripe if it is used. |
static electricity |
People with static electricity should not damage integrated circuits under normal conditions.Between any contact and the ground,1500V of static electricity is discharged by a 100 pF capacitor through a 1500 ohm resistance, and the card's function should not be degraded when exposed to it. |
heat dissipation |
|
Number of card insertions | The number of card insertion can reach more than 200000 times |
corrosion | Store in 5% NaCl for at least 24 hours, and the card will operate and store normally. |
Wipe the number |
|
Storage period |
|
Whether the RoHS directive needs to be met | satisfy |
Whether the
REAC directive needs to be met |
satisfy |
Lead or lead-free coating is required | lead free |
ID-1 UICC physical characteristics |
satisfy ISO/IEC 7816-1[9] and ISO/IEC 7816-2[10] |
embossing | should be met ISO/IEC 7811-1[8] and ISO/IEC 7811-3[11] |
transport protocols |
|
Does the COS system meet the safety standards for information processing products | satisfy |
The terminal connects, activates and deactivates the UICC in accordance with the operating procedures specified in ISO/IEC 7816-3[11].
For any operating voltage, the activation sequence and deactivation sequence are monitored under normal switching conditions, and each contact should be activated and deactivated in a certain order.
Whenever possible, it is recommended that the deactivation sequence as defined in Section 5.4 of ISO/IEC 7816-3[11] be followed in all cases when a terminal is powered down.
If the UICC clock has been stopped and has not been restarted, the terminal may be activated in any order as long as all other contacts reach the low level before the VCC leaves the high level. If the UICC clock has been stopped and restarted prior to deactivation, the sequence of deactivation should follow Section 5.4 of ISO/IEC 7816-3[11].
When A VPP is connected to A VCC (in this section only terminals that support type A operating conditions are allowed to do so), then the VPP shall be activated and deactivated together with the VCC in accordance with Sections 5.2 and 5.4 of ISO/IEC 7816-3[11] for activation and deactivation. See Figure 2 and Figure 3 for the activation and deactivation processes:
1) Your inquiry will be replied within 12 hours.
2) We provide OEM, ODM service, the details of the product can be made as your requirement.
3) Excellent before service and after service.
Beijing Huabao Xintong Technology Co., Ltd. is a company engaged in professional smart card production, IC card system integration and IC card reader manufacturing. The company’s products include non-contact IC cards, contact IC cards, test cards, portrait ID cards, telephone cards, mobile phone test cards and other materials, various contact and non-contact IC card readers, as well as system solutions and large Data collection etc.
The company gives full play to its location in the capital, smart Beijing, and energy nationwide; it continues to attract interest in advanced production equipment, strives to explore new card manufacturing technologies, and has a team of high-quality talents who are dedicated to their jobs and look for a wide range of products. High quality, low price, high efficiency, and comprehensive after-sales, good corporate image.
Beijing Huabao Xintong Technology Co., Ltd. has been processing intelligent processing smart card chip design, application and reasonable processing and production. In terms of actual production, Beijing Huabao’s "technical service production concept" strictly focuses on product design, production, sales and service, and strives to provide products and services to the society, high-quality products and high-quality win-win scope to obtain customers. Service customers and support, current and national sales, some products are also exported overseas.
Adhere to market-oriented, technological innovation as the leader, under the trust and support of the majority of users, give full play to the diligent wisdom of the Chinese, unite the heroes of the world, gather the talents of the sea, and strive to become a powerful player in the industry. Your loyal friends and partners will create a mutually beneficial and win-win future.
Beijing Huabao Xintong Technology Co., Ltd. was established on February 23, 2012, and its business period is from February 23, 2012 to February 22, 2032. Registered address: 788 Chuangyi West Road, East District, Economic Development Zone, Tongzhou District, Beijing No., the main business scope: technology development, computer system integration, data processing, basic software services, application software services, sales of instrumentation, electronic products, communication equipment, etc. There are 62 employees in the company, and college degree or above accounts for the number of employees. There are 26 people, of which 16 are technicians.
1.What's your advantage?
A: Honest business with competitive price and professional service on export process.
2. How I believe you?
A : We consider honest as the life of our company, we can tell you the contact information of our some other clients for you to check our credit. Besides, there is trade assurance from Alibaba, your order and money will be well guaranteed.
3.Can you give warranty of your products?
A: Yes, we extend a 100% satisfaction guarantee on all items. Please feel free to feedback immediately if you are not pleased with our quality or service.
4.Where are you? Can I visit you?
A: Sure,welcome to you visit our factory at any time.
5.How about the delivery time?
A: Within 15-35 days after we confirm you requirement.
6.what kind of payment does your company support?
A: T/T, 100% L/C at sight, Cash, Western Union are all accepted if you have other payment,please contact me.