Russia Version TW9010 Two way car alarm Mobile phone control car GPS car two-way anti-theft device upgrade gsm gps

Russia Version TW9010 Two way car alarm Mobile phone control car GPS car two-way anti-theft device upgrade gsm gps

Pay attention:the package do not with the battery!

Hello, distinguished users:

As many consumers have encountered some confusion in the process of installation and use after purchasing recently, we list them here one by one for your reference.

1. After getting the product, the first step is to download an NFLH-APP on mobile phone, which only supports Android and Apple phones. In the second step, when scanning two-dimensional codes, we can try to use multiple software scans. Some software scans will cause code scrambling, which can not be downloaded. When installing APP, you need to open and allow the permission settings in the mobile phone settings function, so that APP can be used normally. If the permission is not turned on, you will not be able to receive car alarms on your mobile phone.

2. After the installation of APP is completed, the system registration begins. First of all, select registration, enter the screen and then enter the e-mail, Click to get the authentication password. Log in to your email and check the password you received. Back to APP, enter the validation password, then set your own password to log in to APP, and then enter the password again. Enter the IMEI number, which is pasted on the outside of the host and on the side of the color box. Finally, enter your license plate number, click OK and wait for the prompt.

3. Return to the original interface, click login, enter your email address, enter the password of login APP, and click OK. Enter the main control screen

4. After entering the main control interface, click on the blue icon in the upper left corner. When entering the new interface, you will see the "program" icon, which is used when matching the car anti-theft device.

5. Assemble products, connect power supply, GSM antenna and GPS antenna, and pay attention to inserting a SIM flow card in GSM format. Special attention should be paid to the direction of the SIM card. The metal is facing up and the notch is outside. It is correct to insert it into the main engine and finally see the notch leaking out.

6. Find the OBD on the car and plug it in to get electricity. If the OBD is occupied, it doesn't matter. Please cut off our 2P power cord and see a red line. Please connect it to the 12V power line. Another black line is connected to the negative pole. There is no problem with this operation. Note that the GPS antenna needs to be exposed on the dashboard in order to receive the GPS signal well.

7. When the host is connected to the power supply, the LED above will flicker. Watch for the orange light. When it can flicker quickly, it represents the network connection OK. In order to verify whether OK is really connected, the SIM card number on the host can be dialed by mobile phone. If the phone can be dialed, the communication of the system is normal. Look at the white LED, and the flicker indicates that the GPS signal is normal.

8. Find out the "  service button " of the original anti-theft device on the car, and begin to The mobile phone opens the APP, finds the "program" icon just mentioned, and matches the remote control. Your original remote controller can be matched together. After the successful Apple matching prompt, to observe whether the car really matches successfully, only when the car lights flicker and the horn sounds, can the matching be successful.

9. Now you can use APP to control the car.