The twin-shaft machine pre-processes the entire tire into approximately 50-80 mm rubber crumb.
The rubber powder production line is a new innovative equipment.Rubber powder production line is used for processing used tires and rubbers to fine rubber powders.End products size can reach 30-120 mesh free of steel wire and fiber.
Capacity | 500-10000kg/h | ||||
Scope of application | Diameter of the tire:400-3000mm | ||||
Output size | 5-100 mesh,Can be Customized | ||||
Complete separation | The rubber Crumbs,Steel and Fibre can be separated automatically. Adopt PLC control system,it is only need 4-6 persons to operate a Tire recycling(granule)production line with 3000kg/h capacity. Low energy consumption.The installed powder of Tire recycling production(granule)line with capacity 3000kg/h is about 800kw. | ||||
Equipment required area | About 680square meter,7m height | ||||
Characteristic of blade | Long service life.High utilization,Multiple maintenance |
The twin-shaft machine pre-processes the entire tire into approximately 50-80 mm rubber crumb.
The tire chips were further processed into less than 20 mm by serrated knife. 96% of the steel wires had been separated from the tire during this step of treatment.
The magnetic metal removal rate reaches 99.7% through the combination of suspended magnetic separator and magnetic roller magnetic separator.
The tire rubber block can be processed into 2-7mm particles , the nylon and the fiber are removed 99.6% by a dust remover.
The broken material is divided into upper sieve and under sieve by the standard 3 mm hole diameter to ensure the purity of the subsequent sorting process.
Dust collection system can collection dust and fibers by the air pipe when the crushing machine working.
Features:
1.The configuration and machine model will be various based on customer's tyre type,maximum diameter and percentage of each type.
2.We can process OTR tyre over 4 m and make pretreatment solution.
3.For customer special requirement,such as the clean rate of steel wire in rubber,we can increase the configuration to increase the separation efficiency.
4.Water cooling system to let the temperature of machine and blade with long life time and continuous working.
Recent customer installation site:
1. Packaging: 1)Wrapped by protective film;
2)Packed by standard import & export wooden cases or carton boxes.
2. Shipping: By logistics; by automobile; by train; by shipping; by air etc.