Welcome to Zhejiang Anji Tianyang Rotational Molding Co., Ltd.
Rotomolding Box Roto Molded Plastic Kayak Water Tanks Maquina Rotomoldeo
Description
Rotational Moulding involves a heated hollow mold which is filled with a charge or shot weight of material. It is then slowly rotated (usually around two perpendicular axes) causing the softened material to disperse and stick to the walls of the mold. In order to maintain even thickness throughout the part, the mold continues to rotate at all times during the heating phase and to avoid sagging or deformation also during the cooling phase. The process was applied to plastics in the 1940s but in the early years was little used because it was a slow process restricted to a small number of plastics. Over the past two decades, improvements in process control and developments with plastic powders have resulted in a significant increase in usage.
The advantage of rotational moulding
1)The cost of plastic rotational mould is low.
2)The edge of rotational moulding products can reach more than 5mm
3)variety of inserts can be placed to rotational mould.
4)The shape of rotational moulding products can be very complex
5)Rotational moulding products can be produced fully closed.
6)Rotational moulding products can be filled with foam material, to achieve thermal insulation.
7)No need to adjust the mould, the thickness of rotational moulding products can be adjusted.
8)It's available to deal with a variety of surface patterns and produce products in various colors.
Our Service
item | material | OEM service | our advantage |
product | plastic | OEM manufacturer, it is a good advice to have your own design and if your quantity is large, then mould fee is free | All kinds pastic including PE, LDPE, HDPE, LMDPE, UV.8-20 resistant, food grade material for plastic product |
The detail process
1.Tell us your idea or send us your samples,we can make drawings
2.Making moulds after all the details confirm
3.Making samples for you to check.if there is any parts need to change,we can revise the mould.
4.Mass production after samples approval.
5.Arrange for the delivery after production
Hi Friend,
Come here to complete your great idea,
Or complete your OEM/ODM complicated product.
We give you the best solution!