Product Type: A. Single Acting Type B. Double Acting Type
Coating: 1.Ordinary Oxidation 2. Hard Anodized 3. PTFE Coating 4. Nickel Plating
Our products can be manufactured in accordance with clients' requirement.
It applied in waste water treatment plants, power plants, refineries, mining and nuclear processes, and pipelines.
Certificate Approved: ATEX CE ISO9001 ISO14001
Operating Conditions:
1. Operating Madia
Dry or lubricated air, or the non- corrosive gases
The maximum particle dia meter must less than 30 μm.
2. Air Supply Pressure
The minimum supply pressure is 2 Bar.
The maximum supply pressure is 8 Bar.
3. Operation Temperature
Standard:-20℃~+80℃
Low-temperature Type:-40℃~+80℃
High-temperature Type:-20℃~+160℃
4. Travel Adjustment
Have adjustment range of ±5° for the rotation at 0° and 90°
5. Application
Either indoor or outdoor
Material Using
No | Parts Name | Qty | Material | Anti-corrosive | Optional Material |
1 | Indicator Screw | 1 | Plastic |
|
|
2 | Indicator | 1 | Plastic |
|
|
3 | Spring Clip | 1 | Stainless Steel |
|
|
4 | Washer | 1 | Stainless Steel |
|
|
5 | Outer Gasket | 1 | Engineering Plastic |
|
|
6 | Cylinder Body | 1 | Cast Aluminum | Hard Anodizing etc. |
|
7 | Inner Gasket | 1 | Engineering Plastic |
|
|
8 | cam | 1 | Alloy Steel |
|
|
9 | upper shaft bearing | 1 | Engineering Plastic |
|
|
10 | upper shaft o-ring | 1 | NBR |
| Viton/Silicone Rubber |
11 | Pinion | 1 | Alloy Steel | Nickel Plating | Stainless Steel |
12 | Bearing | 1 | Engineering Plastic |
|
|
13 | O Ring() | 2 | NBR |
| Viton/Silicone Rubber |
14 | Plug | 2 | NBR |
| Viton/Silicone Rubber |
15 | Adjusting Screw O Ring | 2 | NBR |
| Viton/Silicone Rubber |
16 | Adjusting Screw Nut | 2 | Stainless Steel |
|
|
17 | Adjusting Bolt | 2 | Stainless Steel |
|
|
18 | Piston | 2 | Cast Aluminum/Cast Steel | Oxidation/Zinc Plating | stainless steel |
19 | Piston Guide Plate | 2 | Engineering Plastic |
|
|
20 | Piston Bearing | 2 | Engineering Plastic |
|
|
21 | Piston O Ring | 2 | NBR |
| Fluoro/silicon rubber |
22 | Spring | 0~12 | Stainless Steel | Dipping Paint |
|
23 | End Cover O Ring | 2 | NBR |
| Fluoro/silicon rubber |
24 | End Cover | 2 | Cast Aluminum | Powder Coating etc. |
|
25 | End Cover Bolt | 2 | Stainless Steel |
|
|
26 | Limit Bolt | 2 | Stainless Steel |
|
|
27 | Limit Nut | 2 | Stainless Steel |
|
|
Outline Dimension
MODEL | A | B | C | D | E | G | H | I | J | K | L | M | N | Z | Y | Ø | Air Supply |
JAT32 | 22.5 | 22.5 | 20 | 45 | 65 | 30 | 50 | - | F03 | - | M5X8 | 9X9 | 15 | 126 | - | Ø34 | NUMAR G1/8" |
JAT40 | 23 | 33.5 | 20 | 60 | 87 | 30 | 50 | - | F05 | - | M6X10 | 11X11 | 13 | 124 | - | Ø34 | NUMAR G1/8″ |
JAT52 | 30 | 41 | 20 | 72 | 92 | 30 | 80 | F03 | F05 | M5X8 | M6X10 | 11X11 | 15 | 145 | 104 | Ø34 | NUMAR G1/4″ |
JAT63 | 36 | 46 | 20 | 89 | 109 | 30 | 80 | F05 | F07 | M6X10 | M8X12 | 14X14 | 15 | 169 | 124 | Ø34 | NUMAR G1/4″ |
JAT75 | 42 | 52 | 20 | 100 | 120 | 30 | 80 | F05 | F07 | M6X10 | M8X12 | 14X14 | 15 | 201 | 121 | Ø34 | NUMAR G1/4″ |
JAT83 | 46 | 55 | 20 | 109 | 129 | 30 | 80 | F05 | F07 | M6X10 | M8X12 | 14X14 | 15 | 209 | 147 | Ø34 | NUMAR G1/4″ |
JAT92 | 51 | 57.5 | 20 | 117 | 137 | 30 | 80 | F05 | F07 | M6X10 | M8X12 | 17X17 | 17 | 242 | 168 | Ø41 | NUMAR G1/4″ |
JAT105 | 58 | 64 | 20 | 134 | 154 | 30 | 80 | F07 | F10 | M8X12 | M10X16 | 22X22 | 25 | 275 | 186 | Ø41 | NUMAR G1/4″ |
JAT125 | 67.5 | 70 | 30 | 157 | 187 | 30 | 80 | F07 | F10 | M8X12 | M10X16 | 22X22 | 25 | 332 | 207 | Ø41 | NUMAR G1/4″ |
JAT140 | 76 | 77 | 30 | 174 | 204 | 30 | 130 | F10 | F12 | M10X16 | M12X20 | 27X27 | 30 | 404 | 268 | Ø41 | NUMAR G1/4″ |
JAT160 | 86.5 | 87.5 | 30 | 199 | 229 | 30 | 130 | F10 | F12 | M10X16 | M12X20 | 27X27 | 30 | 470 | 308 | Ø41 | NUMAR G1/4″ |
JAT190 | 103 | 103 | 30 | 233 | 270 | 30 | 130 | F10 | F12 | M10X16 | M12X20 | 36X36 | 34 | 537 | 390 | Ø79 | NUMAR G1/4″ |
JAT210 | 113 | 113 | 30 | 257 | 295 | 30 | 130 | - | F12 | - | M12X20 | 36X36 | 34 | 540 | 390 | Ø79 | NUMAR G1/4″ |
JAT240 | 129 | 129 | 30 | 293 | 332 | 30 | 130 | - | F16 | - | M12X24 | 36X36 | 34 | 602 | 428 | Ø79 | NUMAR G1/4″ |
JAT270 | 146 | 146 | 30 | 333 | 371 | 30 | 130 | - | F16 | - | M12X24 | 46X46 | 52 | 732 | 510 | Ø79 | NUMAR G1/4″ |
Actuator Size Selection for Valve
Model | Ball Valve (Hard Seal) | Ball Valve (Soft Seal) | Butterfly Valve (Hard Seal) | Butterfly Valve (Soft Seal) |
JAT52DA | DN8-10 | DN15-20 |
| DN50 |
JAT63DA | DN10-15 | DN25 |
| DN65 |
JAT75DA | DN20 | DN32 | DN50 | DN80 |
JAT83DA | DN25 | DN40-50 | DN50-65 | DN80-100 |
JAT92DA | DN32 | DN50-65 | DN80 | DN125 |
JAT105DA | DN40-50 | DN65-80 | DN80-100 | DN125-150 |
JAT125DA | DN65-80 | DN100 | DN125-150 | DN200 |
JAT140DA | DN80-100 | DN100-125 | DN150-200 | DN250 |
JAT160DA | DN100 | DN125-150 | DN200 | DN300 |
JAT190DA | DN125 | DN150 | DN200-250 | DN350 |
JAT210DA | DN150 | DN200 | DN250-300 | DN400 |
JAT240DA | DN200 | DN200-250 | DN350-400 | DN500 |
JAT270DA | DN250 | DN300 | DN450-500 | DN600 |
Model | Ball Valve (Hard Seal) | Ball Valve (Soft Seal) | Butterfly Valve (Hard Seal) | Butterfly Valve (Soft Seal) |
JAT52SR |
| DN8 |
|
|
JAT63SR |
| DN15 |
| DN50 |
JAT75SR | DN15 | DN20 |
| DN50 |
JAT83SR | DN20 | DN25 |
| DN65 |
JAT92SR | DN25 | DN32 |
| DN80 |
JAT105SR | DN32 | DN32-50 | DN50-65 | DN80-100 |
JAT125SR | DN40-50 | DN65 | DN80-100 | DN125-150 |
JAT140SR | DN65-80 | DN80 | DN125-150 | DN200 |
JAT160SR | DN80 | DN100 | DN150-200 | DN250 |
JAT190SR | DN100 | DN125 | DN250 | DN300 |
JAT210SR | DN125 | DN150 | DN300 | DN350 |
JAT240SR | DN150 | DN200 | DN350 | DN400 |
JAT270SR | DN200 | DN250 | DN400 | DN450 |
Output Torque of Double-acting Actuator(Unit:Nm)
MODEL | Input Air Supply Pressure(Unit : Bar) | ||||||
2 | 3 | 4 | 5 | 6 | 7 | 8 | |
JAT032DA | 3.1 | 4.7 | 6.2 | 7.8 | 9.4 | 11 | 12.5 |
JAT052DA | 8.5 | 12.7 | 17 | 21.2 | 25.5 | 29.7 | 34 |
JAT063DA | 15 | 22.5 | 30 | 37.5 | 44.9 | 52.4 | 59.7 |
JAT075DA | 21 | 31.8 | 42.4 | 53 | 63.6 | 74.2 | 84.8 |
JAT083DA | 32.5 | 48.7 | 65 | 81.2 | 97.4 | 113.7 | 130 |
JAT092DA | 46.5 | 69.8 | 93 | 116.3 | 140 | 162.9 | 186 |
JAT105DA | 69.3 | 104 | 138.5 | 173.2 | 207.8 | 242.5 | 277 |
JAT125DA | 108 | 162 | 216 | 270 | 324 | 378 | 432 |
JAT140DA | 184.7 | 277 | 369.5 | 461.8 | 554 | 646.5 | 739 |
JAT160DA | 281.5 | 422 | 563 | 704 | 844 | 985 | 1126 |
JAT190DA | 453 | 680 | 907 | 1135 | 1361 | 1587 | 1814 |
JAT210DA | 554 | 831 | 1108 | 1384 | 1662 | 1939 | 2216 |
JAT240DA | 814 | 1221 | 1628 | 2035 | 2442 | 2849 | 3256 |
JAT270DA | 1238 | 1854 | 2472 | 3090 | 3708 | 4326 | 4944 |
Specializing:
We are specializing in manufacturing pneumatic actuator, electric actuator, pneumatic actuated butterfly and ball valve, electric actuated butterfly and ball valve, Limited Switch box and other Accessories.........
Advantage:
1.Price: As we are the professional manufacture in valve actuators and accessories, we ensure that the price offered must be very competitive compare with others.
2. Raw material inspection: All material test high quality, and keep in warehouse.
3. Workers: All workers training 3 monthes, skilled workers on production line.
Sample Order:
We will charge express fee only for old customers in generally, and for new customers we will charge 50% of the units cost and express fee mostly. (It can be discussed, we keep options always.)
Delivery Time:
We usually take 20days for official orders after received the prepayment, And Sample orders will be ready within 7days.
Quality Control:
We got very strict and complete quality system to ensure that each product will meet quality requirements as per clients, incoming quality control, final quality control, out-going quality control. Meanwhile, all of the products will be strictly inspected before delivery.”’ Quality First, Service First’’ that we are pursuing All the time.
Warranty Period:
18 months from the date we signed the contract or PI. Technical support for the whole life.
(In case of goods discrepancy to the order and drawings, the customers issues Reclamation Report concerning defective goods and attaches photo documents. customers shall consider either to make an additional delivery for replacement of defective goods, all expenses are covered by our company. Or the customers shall decide that we should compensate expenses for defective goods. Such compensation will cover all transport costs, custom duty costs, amount of paid goods.)
Payment Terms And Conditions:
1. TT Terms: The payment will be 30% of prepayment by direct bank remittance (T/T),remaining 70% before Shipment or the copy of BL send by us Via Fax or Email.
2. L/C Terms: Payment by L/C at sight and Unrestricted. (L/C must allow 30days minimum from the shipment date of presentation of documents for negotiation, all the clauses within L/C must be clear, concise and acceptable. Do not allow special clauses, terms and conditions.)
Competitive Price:
We provide competitive price, good quality and best service to reach the win-win goal.
Customization:
custom-made is acceptable.