Biomass Sawdust Single Layer Drum Dryer is widely used in the field of building materials, metallurgies, chemical industry, cement and so on. It can dry slag, coal powder, mining powder, clay, sand, limestone and so on. It is made of rotary body, lifting blade, driving device, supporting device etc. The Wood Chips Rotary Dryer has advantages of reasonable structure, high efficiency, low energy consumption and convenient for transportation.
* Cow dung,Chicken manure ,Sand, Cotton straw;
* Sawdust, Wood Chips, Bark;
* Alfalfa, Napier grass, Elephant grass, Sprouted barley, Forage grass
* Coconut fiber, Coco peat, Coco coir, Palm fiber
1. Customized Solution. Designed according to different needs.
2. Multiple Heating Source. Like coal,wood,sawdust,natural gas.
3. Designed Inner Structure For Sawdust,wood chip and biomass.
4. The system is equipped with PLC system and video monitoring system, with a high degree of automation and simple operation.
5. System has a unique sealing structure, no thermal energy leakage.
6. Low investment, low operating cost, and short investment recovery time.
7. Provide Accessory Parts. Accessory parts quality assured.
1.The Professional Dryer Machine use telescope-feed structure, High Performance Biomass Dryer the material quickly.
2.Simple design, self-insulation, improve the heat efficiency to exceed 80%.
3.Structure delicate, stable operation.
4.Gooddryingperformance, coal consumption <8kg when drying 1 ton material.
5.The fuel can be coal, oil, natural gas etc, dry mass, granule and powder material.
6.Reduce land area for 50% compared to single drum rotary dryer, so construction investment is saved 50%power consumption saved 60%.
7.Finished product moisture can be adjusted depends on requirement of client.
8.Lower outlet tempreture, loonger dust removal using life.
9.Drive by tug not gear.
10.Finished product tempreture lower than 60°C, packing can be done continuously.
Rotary dryer/drier machine is mainly composed of shell, back and forth supporting wheel, feeding and discharging unit and gear cap. The accessories which are not in the the scope of this machine include firebox, feeding and discharging equipment, dust catcher, etc.
1. Shell: Q235-B
2. Tyre: ZG45
3. Bull gear: ZG45
4. Supporting roller: ZG45
5. Shaft of Supporting roller: 45 stell forging
6. Pinion: 40Cr
7. Motor: YCT355-4B
8. Reducer: ZL100-22.4-II
Installation
1. The equipment should be installed on the basis of the horizontal concrete, fastened by the foundation bolt.
2. The dryer body should be vertical with the level when installation.
3. Check the bolt from all the parts, assure it fastened.
4. Equipped with the power line and control the switch according to the equipment.
5. After check, it can be production after the normally testing.
Model |
Shell diameter (mm) |
Shell length (mm) |
Slope(°) |
Rotary speed (r/m) |
Weight(t) | Power (KW) | Volume (m3) |
Φ0.6×8 | 600 | 8000 | 3-5 | 8 | 5.1 | 6-4 | 2.26 |
Φ0.8×10 | 800 | 10000 | 3-5 | 7.2 | 6.9 | 6-4 | 5.02 |
Φ1.0×10 | 1000 | 10000 | 3-5 | 6.73 | 7.5 | 6-5.5 | 7.85 |
Φ1.2×12 | 1200 | 12000 | 3-5 | 5.8 | 13.1 | 6-11 | 13.31 |
Φ1.5×12 | 1500 | 12000 | 3-5 | 4.8 | 22.3 | 6-15 | 21.2 |
Φ2.2×14 | 2200 | 14000 | 3-5 | 3.2 | 52.8 | 30 | 53.22 |
Φ2.4×18 | 2400 | 18000 | 3-5 | 3 | 73.3 | 37 | 81.43 |
Φ2.8×24 | 2800 | 24000 | 3-5 | 2.59 | 97 | 75 | 147.8 |
We trust that our experience and intimate knowledge of this line will entitle us to your confidence.
The more you know us, the more you trust us!
...