Load | Test item/Features | Configuration feature |
15 Tons | Its main for the brake performance testing. The roller brake tester can detect and calculation the each axis ((left and right wheels) block force of car, brake force and the deviation of brake force (process deviation, and maximum deviation), as well as the ratio of brake force and axis load , the ration of hand brake force and whole quality of the car. The equipment is core part of the motor vehicle security performance detection and the high technical performance requirements of safety testing equipment. 1. The main body is wholly welded, with high intension, no need to fix the main body on the ground with ground bolts and it is easy to adjust and install. 2. The rollers are covered with high quality surface sand, advanced adhesives and technology, the adhesion modulus is above 0.85 in case of both dry and wet, the longevity is over 200000 times. Test precision is high, repetition performance is good, brake force errors 3.You can choose the tester with or without airbag lifting device.(The airbag lifting device is for the convenience of the vehicle entering and leaving the tester) | Using of reinforced steel guarantees strong and durable structure-bodies.Corundum-sand roller sets with high adhesion in both dry and wet conditions.Automatic start and tyre anti-skid program. No need for anchor bolt installation.With calibration device. Roller diameter*length:245mm*1100mm, Motor power (kw):2×15.Braking force measurement range (kN):2×(0---45).The power supply:380V 50/60HZ |
10 tons | Using of reinforced steel guarantees strong and durable structure-bodies.Corundum-sand roller sets with high adhesion in both dry and wet conditions.Automatic start and tyre anti-skid program. No need for anchor bolt installation.With calibration device. Roller diameter*length:245mm*1000mm, Motor power (kw):2×11.Braking force measurement range (kN):2×(0---30).The power supply:380V 50/60HZ | |
4 tons | Using of reinforced steel guarantees strong and durable structure-bodies.Corundum-sand roller sets with high adhesion in both dry and wet conditions.Automatic start and tyre anti-skid program. No need for anchor bolt installation.With calibration device. Roller diameter*length:245mm*750mm, Motor power (kw):2×3.Braking force measurement range (kN):2×(0---15).The power supply:380V 50/60HZ.The brake tester can be upgraded to ABS brake tester. Can be upgraded to test 4WD car |