Function&Interface | Detailed Description |
CPU | RK3288 Cortex-A17 quad-core, up to 1.6GHz |
DDR | DDR-III 1GB (2GB optional) |
Storage | The default comes with an 8GB EMMC NAND chip that can scale up to 128GB |
LVDS-1 | 30-pin industry-standard dual LVDS supporting VESA/JEITA format up to 1080P output |
LVDS-2 | 30-pin industry-standard dual LVDS supporting VESA/JEITA format up to 1080P output |
EDP-1 | 20-pin industry-standard EDP supporting 1~4 lanes format up to 1080P output |
EDP-2 | 20-pin industry-standard EDP supporting 1~4 lanes format up to 1080P output |
Line Output | Support standard left and right channel line output (pin header and headphone jack) |
Amplifier output | 8 Ohm 6W Dual Audio Amplifier Output |
MIC Input | Differential MIC input (pin header) |
Line Input | Support standard left and right channel line input (pin header) |
USB Interface | 4 horizontal connectors (Double Socket), 5 pin headers, 1 OTG pin header |
Serial Port | 1 RS-232 DB-9,2 TTL/RS-232 pin headers, 1 TTL debug serial port |
Cash Box Port | 1 RJ11 6-pin standard cash box connector |
Micro SD Card | Self-elastic micro SD card socket, up to 128GB capacity |
Camera | Support USB camera within 2 million pixels |
WiFi | Built-in high performance SDIO interface WiFi module, support IEEE 802.11 b/g/n |
Bluetooth | Built-in high performance serial port BT module (optional) with support for V2.1+EDR/BT v3.0/BT v3.0+HS/BT v4.0 |
Ethernet | 10/100M Adaptive Ethernet RJ45 connector+4-Pin header |
MiniPCI-E 4G | Industry standard MiniPCI-E 4G module interface with standard SIM card socket |
Baclight Control | Industry standard LCD backlight control header, support for backlight switch and brightness adjustment |
Infrared RC | Standard infrared remote control receiver and infrared receiver pin header |
GPIO Signals | 8-way GPIO signals for such as GPIO buttons and/or 3.3V digital input/output |
I2C Bus | I2C pin header for I2C capacitive screen and etc |
SPI Bus | SPI pin header for SPI UART and etc |
Real Time Clock | Ultra-low-power RTC circuit (CR1220 battery) with timer and alarm functionalities |
LED Indicator | Red LED indicator for standby and green LED indicator for running |
Buttons | Recovery mode button and power switch button |
DC Input | Supports 9~15V wide voltage DC power input |
Ambient Requirement | Working temperature 0°~70°, working humidity 0%~95% (non-condensing) |
Physical Size | Length*Width (170mm*105mm) |
Android Version | Recommended Android 5.1.1, Optional Android 6.0 |