Hammer crusher is suitable for mid-hard and light erosive materials, whose pressure resistance strength is no more than 150Mpa and humidity lower than 15%, such as coal, salt, chalk, gypsum, blocks, limestone, etc.
Hammer crusher is mainly used in such industries as cement, coal separation, electricity generation, building materials and compound fertilizer, etc.
Hammer crusher can crush materials with different sizes into equal particle, which favors the next procedure. The hammer crusher has the advantages of reliable mechanical structure, high productivity and favorable applicability.
Motor drives the rotor quickly in the crushing cavity. Raw materials enter the crusher through the feeding inlet and are impacted, cut and ground by high-speed hammer heads.
There is a grate under the rotor assemblly, so that materials with size smaller than the grate mesh will be screened out and others are left to be further hammered until they reach the standard size.
The size of the final product can be adjusted by changing the grate, the gap between the rotor assemblly and the grate can also be adjusted according to different requirements.
1. Hammer head work, adopt new technology of casting, with wear-resistant, resistant to impact.
2. Hammer to break the seal body structure, solve the crushing plant dust pollution and ash leakage problems in the body
3. The overall design beautiful shape, compact structure, less wearing parts, convenient maintenance, is updating and upgrading of products
4. Compact structure, beautiful appearance, good abrasion resistance, maintenance is convenient.
Model | Input size | Output size | Capacity | Motor |
PC 300x200 | ≤ 80mm | ≤8mm | 1-5t/h | 5.5kw |
PC 400x300 | ≤100mm | ≤10mm | 5-10t/h | 11kw |
PC 600x400 | ≤120mm | ≤15mm | 10-22t/h | 18.5-22kw |
PC 800x600 | ≤150mm | ≤15mm | 18-40t/h | 55kw |
PC 1000x800 | ≤200mm | ≤15mm | 25-50t/h | 75kw |
PC 1000x1000 | ≤200mm | ≤20mm | 30-55t/h | 132kw |
PC1300x1200 | ≤250mm | ≤25mm | 35-65t/h | 180kw |
