Rock Drilling Bit pdc anchor drill bits

It is used for the parts with the drilling function at the end of the hollow anchor body; the drills of different types can be selected according to the different construction geological environments.
Features:
1) The drill bit is usually a steel structure, such as a medium hard rock layer, or an alloy in the chip edge;
2) The drill bit has a water hole and a chip flute. When drilling, the high pressure water washes the drill cuttings through the water hole, so that the drill cuttings are discharged from the chip flute;
3) One end of the drill has internal threads, which can be screwed with the hollow anchor body;
4) If the customer has other requirements, it can be customized according to customer requirements.
use:
1) installed at the top of the hollow anchor body for drilling into the rock mass;
2) The drill bit is left in the hole after drilling to work in the living room, so that the hollow anchor body is located in the middle of the drill hole to ensure uniform coating of the cement slurry around the hollow anchor body.
Thread type: R25, R32, R38, R51, T30, T40, T52, T73, T76, T103 etc.

FAQ