Welcome to TradeChina
Right Angle Pulse Jet Valve Solenoid Valve For Dust Collector
FOB Reference Price
Purchase quantity ()
Minimum order quantity
Payment
Meorient Import & Export Co.LTD
China - Hangzhou
Trading Company
Trade Capacity
Export Percentage
Nearest Port
Hangzhou,Shanghai
Accepted Delivery Terms
Employees
5-10人
Accepted Payment Currency
USD,CNY
Average Lead Time
45 Day(s)
Certifications
Product Specifications
--Product Description
Product Information
Right Angle Pulse Jet Valve Solenoid Valve For Dust Collector
Product Description
DMF-Z-20 | Pressure:0.3-0.8Mpa |
Material:Aluminum Alloy | Temperature:15-65℃ |
Coil Material:Brass | Voltage:AC220V, AC110V(50Hz/60Hz) |
Medium:Air | DC12V,DC24V |
Type:Normally Closed | Sealing:NBR |
Solenoid Valve Size Chart(mm) | ||||||||||||
Valve NO. | Orifice | A | B | C | Thread | Weight(kg) | ||||||
DMF-Z-20 | 20 | 88 | 48 | 128 | 1/2" | 0.72 | ||||||
DMF-Z-25 | 25 | 108 | 60 | 136 | 1" | 1.1 | ||||||
DMF-Z-40S | 40 | 131 | 75 | 184 | 1 1/2" | 1.65 | ||||||
DMF-Z-50S | 50 | 180 | 100 | 206 | 2" | 2.9 | ||||||
DMF-Z-62S | 62 | 204 | 110 | 226 | 2 1/2" | 3.5 | ||||||
Desdription
AMF electro magnetic pulse valves is a right-angle valve, with the90° angle between the inlet and outlet, which is suitable for the installation connection between the gas dome and the baghouse blow tube to provide good air flow and dust clean pulse satisfying the requirements.
Working Principle:
The electro magnetic pulse diaphragm valve is composed of two gas cells. When the compressed air is connected , it comes into the back gas cell though the orifice, the pressure in the back gas cell pushes the diaphragm closely against the outlet of the valve and the electro magnetic valve stays in the closed condition.
The electrical signals from the pulse jet control device move the armature of the electro magnetic pulse valve. The air escape of the back gas cell opens and the back gas cell loses pressure quickly, thus the diaphragm moues back and the compressed air blows though the valve outlet. The electro magnetic pulse valve comes into the open condition.
When the electrical signals from the pulse jet control device disappear, the armature of the electro magnetic pulse valve return to its original position. The air escape of the back gas cell closes and the pressure in the back gas cell rise, which pushes the diaphragm closely against the valve outlet. The electro magnetic valve comes into its closed condition again.
Installation Method:
Solenoid pulse valve input is connected to the metal pipe of air storage cylinder, and its oytput is connected to the blast pipe of the dust pocket. Between the connect screw thread is filled with tetrafluoroethylene tape for seal.
Working Principle:
The electro magnetic pulse diaphragm valve is composed of two gas cells. When the compressed air is connected , it comes into the back gas cell though the orifice, the pressure in the back gas cell pushes the diaphragm closely against the outlet of the valve and the electro magnetic valve stays in the closed condition.
The electrical signals from the pulse jet control device move the armature of the electro magnetic pulse valve. The air escape of the back gas cell opens and the back gas cell loses pressure quickly, thus the diaphragm moues back and the compressed air blows though the valve outlet. The electro magnetic pulse valve comes into the open condition.
When the electrical signals from the pulse jet control device disappear, the armature of the electro magnetic pulse valve return to its original position. The air escape of the back gas cell closes and the pressure in the back gas cell rise, which pushes the diaphragm closely against the valve outlet. The electro magnetic valve comes into its closed condition again.
Installation Method:
Solenoid pulse valve input is connected to the metal pipe of air storage cylinder, and its oytput is connected to the blast pipe of the dust pocket. Between the connect screw thread is filled with tetrafluoroethylene tape for seal.
Company Profile
Certifications
Our Advantages
If the quantity of order is not very big,we could send them to you by express delivery,such as TNT,DHL,UPS OR EMS etc.
If order is big ,we will advise you use Air Shipping or Sea Shipping through your nominated forwarder agent.Our long-term
cooperated agent also available.
If order is big ,we will advise you use Air Shipping or Sea Shipping through your nominated forwarder agent.Our long-term
cooperated agent also available.
FAQ
1. Are you a factory or trading company?
We are a factory, we have rich experience for manufacturing about 10 years.
2. Where is your factory located? How can I visit there?
Our factory is located in Yuyao city,Zhejiang Province,China.
It is about more than 3 hours from Shanghai airport, We can pick you up if you need, welcome to visit our factory.
3. What is the material for your products?
The material is Brass or stainless steel, coil material is brass.
4. Can you make samples?
Yes, we can make samples for you.
5. How does your factory do as quality control?
Quality is the lift of our factory. We have inspector in different post, and there are three inspectors before packing to get best quality products.
6. How is your after sale?
If any damaged rings in the course of carriage, with the checking it's our mistake, we will take full responsibility to compensate the customers.
Contact us
Recommend Products
No desirable products?
Sourcing assistant>
How to start your business
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier