BP-183-L Rheology Modifier
GENERAL INFORMATION
BP-183-L is an organoclay for solvent-based systems of low to medium polarity.
ADVANTAGES
High gelling efficiency over low to medium polarity organic liquids.
Easy of incorporation. No need for polar activator or making pregel.
Consistent in rheology and thixotropy development.
Excellent sag resistance and viscosity control.
Easy of dispersion.
Can be added at any step,even can be used in post-addition to correct the final viscosity of a certain batch.
Produce gel with light color and high transparency.
PHYSICAL PROPERTES |
RECOMMENDED USE |
|
Appearance: Free flowing powder |
· Acrylic paint | · Solvent epoxy paint |
Color/Form : White |
· Alkyd paint | · Wooden paint |
Density: 1.65g/cm3 |
· Anti-corrosion paint | · Adhesive |
Moisture: ≤3.5% |
· Chlorinated rubber paint | · Inks(Mineral oil) |
Fineness: 95% Min thru 200 mesh |
· Industrial paint |
· Inks(Nitro) |
Loss on Ignition:≤35% |
· Non-solvent epoxy paint | · Lubricating grease |
|
· Polyester paint | · Nitro lacquer |
|
· Road paint | · Cosmetics |
|
· Silica paint |
|
BP-183-L belongs to the unconventional type of organoclays group, being a self-activated organoclay, BP-183-L does not require a chemical (polar) activator to reach the proper level of delamination of the organoclay platelet stacks. .
The amount of BP-183-L rheology modifier required depends upon the type of organic system and the degree of thickening or other properties desired. Addition levels are typically between 0.2%-2.0% based on the total formulation weight.
HEALTH AND SAFETY DATA
Before handling this material, read the corresponding Safety Data Sheet (SDS) for safety, health and environmental data.
SHELF LIFE
BP-183-L has a shelf life of at least two years from date of manufacture. Store in a cool dry place.
CERTIFICATIONS
ISO 9001 Quality System, ISO 14001 Environmental Management System, ISO 18001 Safety System