Rexroth A2F A2FO A2FM Axial Piston Hydraulic Pump and Motor with High Speed

Rexroth A2FM series of A2FM10,A2FM12,A2FM16,A2FM23,A2FM28,A2FM32,A2FM45,A2FM56,A2FM63,

A2FM80,A2FM90,A2FM107,A2FM125,A2FM160,A2FM180,A2FM200,A2FM250,A2FM355,A2FM500

A2FM Axial piston ration motor features
1. oblique axial quantitative motor is suitable for hydrostatic drive of open circuit
2. applicable to the field of walking machinery or industry
3.the output flow is proportional to the driving speed and displacement
4. the design of its drive shaft bearing makes the application field reach the expected service life
5. multiple specifications can match each actual drive
6. favorable power/weight ratio
7.compact and economical
8. optimum volumetric efficiency
9. integral plunger design with plunger ring

10.Top quality

11,competitive price 

Safety instructions:

A2FM motor is designed for open circuit.
- the project planning, installation and commissioning of the axial plunger unit shall be performed by qualified personnel.
Read the instruction manual before using the axial plunger unit.Request from Bosch rexroth if necessary.
- there is a risk of burns in the axial plunger unit during and shortly after operation.Appropriate safety measures (e.g. wearing protective clothing) should be taken.
The characteristics of the axial plunger unit may change depending on the working conditions (working pressure, oil temperature).
-- oil inlet of working pipeline:
· the oil port and fixed thread are designed according to zui's large specified pressure.The manufacturer of the machine or system shall ensure that the connection elements and piping are safe enough to meet the required working conditions (pressure, flow rate, hydraulic oil, temperature).
· working pipeline oil inlet and functional oil outlet are only used for hydraulic pipeline.
- follow the data and instructions included here.
The product cannot be approved as a part of a general mechanical safety concept in ISO 13849.
-- the overflow valve will be installed in the hydraulic system.
-- tighten torque using the following:
Joint:
See manufacturer's instructions for tightening torque of the joints used.
· mounting bolts:
For installation bolts with ISO metric threads up to DIN 13 and threads up to ASME B1.1, we recommend checking the fastening torque of each box body according to VDI 2230.
· threaded hole of axial plunger unit:
Zui large allowable tightening torque MG Max is zui large for threaded holes and must not exceed that.
· locking screw:
For metal locking screws supplied with the axial plunger unit, the fastening torque MV required by the locking screw shall be used.

Description:
Axial piston unit of bent axis design with fixed displacement,for use as either pump or motor in hydrostatic drives,in open or closed circuit.
If operated as apump,the flow is proportional to the drive speed and displacement. if operated as a motor,the output speed is proportional to the swept volume and inversely paoportional to displacement.The output torque increases with the pressure drop between the high and low pressure sides

Special Features:

High performance rotary group with well-proven spherical control area with the advantages;self-centering low peripheral speed,high efficiency.

Robust rolling bearings endure long service life.

Drive shaft capable of adopting radial loading.

ISO mounting flange,uniform for fixed displacement pumps/motors and variable motors from size55.

May be used in conjunction with fire-resistant fluids.

low noises generation