Retro Reflectometer for Road Marking Line
I. Overview
Retro-Reflection Meter For Road Marking is a professional measuring instrument used to measure the reflectivity of road markings. The measured parameters are the retroreflective coefficient R'or the specific brightness of the marking line in mcd. lx-1. m-2. The instrument is simple to operate and reliable in measurement. It can be used not only in laboratory environment, but also in field measurement. It is an optimum instrument for measuring the reverse reflection performance of pavement markings, such as production, quality supervision, engineering construction and supervision units.
II. Main Functional Characteristics and Technical Parameters
1. Product Basis and Standards
The instrument is designed and developed with reference to relevant international technical documents and current national standards and norms in China. It meets the requirements of No. 72 published by the International Lighting Commission (CIE), ASTM D4061-94, DIN67520, 67521 of Germany, GB/T 26377-2010 Reverse Reflectometer of China, GB/T 16311-2009 Quality Requirements and Monitoring Methods of Road Traffic Markings, JJG 059-2004 Verification Regulations of Reverse Reflectometer.
2. Measurement principle
The geometric condition of the retroreflective marking instrument is to simulate the scene observed by the driver in the cab when the headlamp illuminates the marking made of the retroreflective material on the road at night.
The angle between the optical axis of the headlamp and the normal line of the road surface (reference axis) becomes the incident angle (beta), which is set at 88.76 degrees. The angle between the optical axis of the headlamp and the reverse light is called the observation angle (alpha), which is set at 1.05 degrees. The light source and optical system are projected to the marking line according to the incident angle beta. The size of the measured marking line is 200 X 95 mm. The reflected light from the marking line is emitted to the filter equipped with V(lambda) according to the observation angle alpha of 1.05 degree. The measured value is displayed on the measuring value display after processing, that is, the measured value of the inverse reflection coefficient R'.
3. Main parameters
The observation angle of the instrument is alpha=1.05 degrees, the incident angle is beta=88.76 degrees and the complementary angle is 1.24 degrees.
Light Source Color Temperature is 2856K+50K (CIEA Light Source)
The detector is a silicon diode + V (lambda) rectifier, which meets the requirements of CIE standard spectrophotometric observer spectral optical efficiency V (lambda).
The measurement range of L retroreflective coefficient R'is 0-3000 MCD lx-1 m-2
Battery Continuous Working Time: 72 Hours
Data Storage: 10,000 Test Information
Screen: 4.5 "854x480
Computer Connection: TF Storage Card
Charging mode: 220VAC 50HZ; DC8.4V
Power supply: lithium (6600 mah)
Protection Level: IP54
Use temperature: - 15 C ~ + 50 C
Storage temperature: - 30 C ~ + 85 C
Operating humidity: 10-90%, no condensation
Volume (length x width x height): 450mm x 132 mm x 132 mm
Net weight: 4.35kg (main engine)
Packaging Box: Special Box for High-end Instruments
1. Installation and training:
a. If buyers visit our factory and check the machine, we will teach you how to installand use the machine, and also train your workers/technician face to face.
b.Without visiting, we will send you user manual and video to teach you to install and operate.
c.If buyer needs our technician to go to your local factory, please arrange board and lodging and other necessary things.
d.We will give your professional guidance (Product introduction and operation manual) together with product .
2. After Service:
a.One year guarantee for whole machine.
b.24 hours technical support by email
c.If there is any problem found of the machine, we will repair it for free in one year.
d.Honesty to working for you, after or before sale with our patient and sincerit
Frequently Asked Question:
Q1.Are you trade company or factory?
A:We are trade company but we also have own factories. Building trade company is just for exporting various types of concrete mould and others products.
Q2. How to visit your company
1. Fly to Beijing airport: By high speed train from Beijing Nan to Cangzhou Xi (1 hour),then we can pick up you.
2. Fly to ShangHai Airport: By high speed train from Shanghai Hongqiao to Cangzhou Xi(4.5 hours), then we can pick you up.
Q3:After an order is placed, when to deliver?
A:Generally about 7-20days, If we have inventory, we can arrange shipment within 3 days.
Please be aware that our production lead times depend on specific items and item quantities.
Q4:What about the warranty with after - sales services?
A:, We can help you repair your equipment freely.,even it's not from our factory. After the warranty, the professional after-sale service team will provide perfect technical support and help guests solve problems encountered while using our product, handles guest problems and complaints in a professional and timely.
Q5:What about the product' services and quality?
A:Each instruments must be carried out 100% quality examination and test when shipping and delivery goods. Product use training, each of our product provide video training to show you how to install & operate. We can arrange engineer to train the operation of equipment to customer's company when you need. Products are widely recognized and trusted by users.
Our company can also produce the customized testing machines as clients' requirements.
Best service and the best price for you.