Item No. | Interface Caliber | Filtration Accuracy | Proper Temperature | Pressure Range | Waste Water Ratio | Purified Water Flow | Can drink directly |
HJ-K101 | 1/2'' 3/4'' 20PPR 25PPR | 40μm | -20℃ | 0.1-1.6Mpa | No Waste Water | 4T/H | No,need to use with other purifiers |
Failure Phenomenon | Possible Causes | Approach |
No water | 1.Whether the water source has water 2.Whether the main inlet valve is open | 1.Waiting for water supply 2.Open the main inlet valve |
Small water flow | 1.Whether the main water inlet valve is fully opened 2.Partially blocked filter surface | 1.Fully open the main water inlet valve 2.Rinse the filter screen to remove debris |
Water seepage at the joint | 1.Whether the filter parts have been disassembled by themselves 2.Loose parts at the seepage 3.The raw material tape at the threaded connection is wrapped too little 4.The rubber sealing ring at the water seepage is aging or damaged | 1.Check whether the sealing ring is misplaced or fallen off 2.Retighten the threaded joint with a wrench 3.Re-wrap the raw material tape and tighten 4.Replace rubber seal |
Doesn't display pressure | 1.Damaged pressure gauge 2.Whether the main inlet valve is open | 1.Replace the pressure gauge 2.Open the main inlet valve |