Reinforcement Rebar thread steel bar welded wire mesh for building
Welded reinforcing mesh also known as welded wire reinforcement, is a kind of mesh reinforcement. Reinforcing mesh is a high efficient, economical and flexible for concrete reinforcement, greatly save the construction time and reducing the labor force. It is widely used in road and highway construction, bridge engineering, tunnel lining, housing construction, floor, roof and walls, etc.
Features of our concrete reinforcing mesh
· The welded wire fabric makes them easier to work on.
· There are different diameters of steel reinforcing mesh each suited for a particular application.
· There are different designs of steel reinforcing mesh from bent and rolls to flat sheets.
· As per BS 4482 standards and codes, the stainless steel wire used in the manufacture of the
steel reinforcing mesh has a 510MPa tensile strength and 485MPa minimum proof stress.
· The steel reinforcing mesh is rigid making it possible for you to control concrete cover during
construction.
· Manufacturers produce steel reinforcing mesh under SANS1024 Standard Specifications.
· The steel bars stay intact whenever immersed in concrete because they are carefully welded
in mats.
· You don’t have to apply additional surface treatment to the steel reinforcing mesh before
use.
· Less field labor needed when making reinforced concrete slabs using this mesh thus
drastically speeding up the construction process.
· The mesh is easy to load and unload, and easy to handle at the working site.
· Properly mixed concrete is poured into the mesh and then given time to dry out. The
concrete, as it continues to dry out, it grips the steel bars tightly creating a bond stress
between these two materials. This bond stress is essential because it reduces bending and
makes reinforced concrete slabs stronger.
Types of steel reinforcing mesh
Below are different categories of steel reinforced mesh you can purchase for your
construction work.
· Square opening steel reinforced mesh: This mesh has stainless wires that runs vertically and
horizontally supporting each other while forming small squares.
· Rectangular steel reinforced mesh: This mesh has stainless wires that runs vertically and
horizontally supporting each other while forming smaller rectangular shapes.
· Welded steel reinforced mesh for building vertical walls.
· Customized types, also known as special steel reinforced mesh.
We have you sorted
We have put a full line of high quality stainless steel welded mesh up for sale and for a quick
delivery. For more information about our meshes, feel free to give us a call.
1.GERMAN STANDARD DIN488 (SIZE:2150MMX5000MM)
| Ref No. | Std Unit | Longitudinal Wires(mm) | Cross Wire(mm) | Pitch of Wire (mm) | Mass(Kg) | Mass(Kg/m2) |
| Q131 | Sheet | 5 | 5 | 150x150 | 22.476 | 2.091 |
| Q181 | Sheet | 6 | 6 | 150x150 | 32.401 | 3.014 |
| Q221 | Sheet | 6.5/5.0 | 6.5 | 150x150 | 33.707 | 3.316 |
| Q295 | Sheet | 7.5/5.5 | 7.5 | 150x150 | 44.245 | 4.116 |
| Q378 | Sheet | 8.5/6 | 8.5 | 150x150 | 66.659 | 5.157 |
2.Australia/New Zealand Standard AS/NZS 4671:2001(SIZE:6000X2400mm)
Ref No. | Std Unit | Longitudinal Wires(mm) | Edge wires (mm) | Cross Wires(mm) | Mass(Kg) |
SL81(F81) | Sheet | 7.6 @100 | 7.60 @100 | 7.60 @100 | 105 |
| SL102(F102) | Sheet | 9.5 @200 | 6.75 @100 | 9.50 @200 | 80 |
| SL92(F92) | Sheet | 8.6 @200 | 6 @100 | 8.60 @200 | 66 |
| SL80(F82) | Sheet | 7.6 @200 | 5.37 @100 | 7.60 @200 | 52 |
| SL72(F72) | Sheet | 6.75 @200 | 4.77 @100 | 6.75 @200 | 41 |
| SL62(F62) | Sheet | 6 @200 | 4.77 @100 | 6 @200 | 33 |
| SL52(F52) | Sheet | 4.77 @200 | 4.77 @100 | 4.77 @200 | 21 |
3.BRITISH STANDARD BS4483
| Ref No. | Std Unit | Longitudinal Wires(mm) | Cross Wires(mm) | Pitch of wire(mm) | No. of sheet per ton | Mass(kg/m2) |
| A393 | Sheet | 10 | 10 | 200x200 | 15 | 6.16 |
| A252 | Sheet | 8 | 8 | 200x200 | 22 | 3.95 |
| A193 | Sheet | 7 | 7 | 200x200 | 29 | 3.02 |
| A142 | Sheet | 6 | 6 | 200x200 | 40 | 2.22 |
| A98 | Sheet | 5 | 5 | 200x200 | 57 | 1.54 |
1. Are you a manufacturer?
Yes, we are the ISO and CE certificated Manufacturer and our factory founded in this industry since 1989.
2. Will your price competitive?
Yes , we have stable and large raw material supplier ,we work with them for nearly 20 years . Our machine and technical it is most advanced , we will send our technical to aboard to learning new technical every year.
3.Can we have a sample ?
Yes , if the samples it is not much big , we can offer free sample , the courier it is paid by customers.
4.Can we visit your factory ?
Yes , you are welcome to visit us . we can pick you up from the airport .
5. What are the payment terms?
We can accept TT , LC , West Union , Money Gram , Cash .
Contact us
name: Ula
web set: http://www.wiremesh-yhy.com
tel: 0086 311 86851859
fax: 0086 311 89918897
mob: 0086 18033724602
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier