RF Laser
Reci RF series laser is sealed-off, modulated-pulse CO2 laser. They are mainly used for cutting non-metallic materials as well as cutting thin metal sheets. Under the condition of high pulse cutting, the thermal influence for non-metallic materials like leather is quite low, which stops the cutting edge from carbonization and keep its original natural color.
Q: Does it similarly as Rofin Rf Metal Laser?
A: Yes, We have the power from 100W to 700W.
Q: I want to customize the Fiber diameter. Can you do it?
A: Yes, we can do 20/30um for FSL1000 and 30/50um for FSC1500 and FSC2000. You can text me if you have other special requirements.
Q: Can you do OEM Fiber Lasers?
A: Yes, if you meet the requirements, we can do some OEM for you.
Q: How can I clean when the laser tube lens polluted?
A: Blow the lens surface obliquely with balloon. If the above no effect, user needs to remove the lens and use a cotton ball with a little alcohol to rotate the lens. No need too much alcohol, but the glue layer of the adhesive lens cannot be touched in case of gas inside escaping. The laser cannot be used till alcohol evaporating.
Q: How can I store the laser tubes when I do not use it?
A: The cooling liquid must run out in storage or transportation; The output must be covered with a dust-proof plastic wrap; The storage temperature should be kept between 2-40°C and the humidity between 10-60%.