Worktable |
honeycomb or blade |
Eneraving area |
1300*900mm |
Laser Power |
60w/80w/ 100w/ 150w / 300w |
Engraving Speed |
0-60000mm/min |
Engraving Depth |
5mm |
Cutting Speed |
0-5000mm/min |
Cutting Depth (Acrylic) |
0-30mm (acrylic) |
Up and down work table |
Ec Up and down 550mm adjustable |
Minimum Shaping Character |
1*1mm |
Resolution Ratio |
0.0254mm (1000dpi) |
Power Supply |
220V(or110V)+/-10% 50Hz |
Resetting Positioning |
Accuracy less than or equal to 0.01mm |
Water protecting sensor and alarm |
Yes |
Operating Temperature |
0-45℃ |
Operating Humidity |
35-70℃ |
Graphic Format Supported |
PLT/DXF/BMP/JPG/GIF/PGN/TIF |
Operation System |
Windows 98/ME/2000/XP/VISTA/Windows 7/8 |
Software |
RDWorks/LaserCAD |
Engraving on Curve Surfaces(Yes/No) |
No |
Control Configuration |
DSP |
Water Cooling(Yes/No) |
Yes |
Maximum Height Of Materials To Engrave(mm) |
120mm |
Laser Tube |
Sealed CO2 glass laser tube |