Welder Type |
European Standards |
Number of Phases |
Nominal Supply Voltage |
Inverter Power Source |
EN 60974-1 / IEC 60974-1 |
1 |
230V ± 15% |
Nominal Supply Frequency |
Welding Current Range (MMA Mode) |
Welding Current Range (TIG Mode) |
Cutting Current Range (CUT Mode) |
50/60Hz |
10-170A |
10-200A |
20-40A |
Maximum Input Current |
Effective Input Current |
Single Phase Generator Requirement |
Fan Cooled |
I1max 31A |
I1eff 15A |
10KVA |
Fan Cooled |
A 3in1 combination device: AC / DC ,TIG, MMA / STICK, plasma cutting AC / DC
B HF ignition (TIG)
C MMA / STICK / E-HAND: coated electrodes are used in this process the electrodes are the
arc carrier and filler metal in one.
D Hot start: Each time the welding machine is restarted, overcurrent is provided.
E 5 Arc-Force: Melted material is more easily transferred to the workpiece.
F Anti-Stick: automatically switches off the welding generator if the electrode sticks to the workpiece.
G Plasma cutter: CUT function with the help of a plasma jet generated by electricity. Cutting material
(e.g. steel, stainless steel, aluminum, copper, etc.)
H Cutting thickness: maximum 12mm (hand-guided), quality cut 8mm (hand-guided)
I Foot remote control switch:It can be connected to a foot pedal remote control switch to control current.
A Test the existing packaging is reasonable and reliable,can meet the transportation requirements.
B After repeated 30 tests and improvements, the existing packaging is finally determined.