Material Thickness | ≤4 mm | |
Length of Material | 100-220 mm | |
Process Speed | 38-42 min/piece | |
Dimension of worktable (L*W) | 420*285 mm | |
Dimension of material inlet/outlet (L*W) | 900*240 mm | |
Motor Power | 220V, 20W | |
This cutlery automatic feeding machine could be installed in the hydraulic press machine, used for the stainless steel cutlery embossing and forming. 1. Save labor cost, with this automatic feeder, one worker could operate 2~5 sets of machine in the meantime. 2. High output, one set of machine could process the spoon or fork around 33~38 pieces per minute. 3. High efficient production, differs from manual production, the feeder no need to stop to catch the workpiece and put down the processed workpiece, the machine could working continuously. 4. Operator friendly, only need the worker switch on/off the machines, loading/unloading the workpieces from the feeder's inlet and outlet. 5. Safety production, no need for the worker to put hands into the frame of the hydraulic press machine/punch press machine. 6. Low power consumption, 0.02kw per hour. | ||
How to select suitable machines? Please send an inquiry with the below information: 1. Photo of the sample. 2. What is the material, length, weight, and thickness of the sample? 3. Your capacity requirement, and your factory production situation. With this information, our engineers could help you to do the process analysis and find a good production program for you. |