Radiolink 12CH Transmitter&Receiver&Telemetry AT10II +R12DS+PRM-01
—Excellent Anti-interference:Only 3ms for 12 channels synchronously, Strong anti-jumping DSSS&FHSS working synchronously to keep the excellent anti-interference performance.
—Real-time Information: Model voltage, RSSI signal strength, speed, altitude, distance and more on the LCD screen display. Support extended engine voltage telemetry module PRM-01 can feedback GPS info, Speed, voltage etc. on AT10II display when work with flight controller APM or PIX.
—Multiple Alarm:Low RSSI alarm setting, low transmitter voltage, receiver voltage and extended engine voltage alarm. DD sounds and words alarming display on the blacklight LCD screen to avoid ignorance when you are in noise environment.
—Voltage Protection System: RadioLink AT10II has included a circuit which prevents damage if you plug it in the wrong way. Low consumption of battery, A 3s 1800mAh liPo battery can work more than 12 hours.
—Suit Multiple Models: Support Radiolink’s R9DS, R12DSM, R6DS, R6DSM,R12DS, receiver. Works with most racer quads on the market, suitable for FPV racing drone, helicopter, multirotor, car boat and more.
—Programmable Mix Control: Fully computerized mixer configuration for fine control over most basic model aircraft functions.
—Variety Switchs:Switches are various lengths for easy recognition and usage. 3 VR switches, 3 three-way position switches, 4 two-way position switches, 1 reset trainer switch. Support multiple aerial control mode and 2 PTZ *control
AT10II RC Transmitter Specifications:
Channels: 12ch
Frequency: 2.4GHz ISM bands (2400MHz to 2483.5MHz)
Channel Bandswidth: 5.0 MHz
Spread Spectrum: DSSS&FHSS
Adjacent Channel rejection: 38dbm
Transmitter Power: <100mW (20dbm )
Operating Current: <90mA
Operating Voltage: 7.4~15.0V
4096 Section Precision
Screen: 3.5 inches 16 colorful screen, 320*480 pixels
Support receivers: R12DS, R9DS, R6DS, R6DSM, and R12DSM
R12DS Receiver Specifications
Signal: SBUS,PWM
Channel: PWM 12 channels, SBUS 12 channels
Working Voltage: 4.8-10V
Working Current: 38-45mA(input voltage: 5V)
Size: 5*3.2*1.5cm
Weight: 20g
Prm-01 Voltage Telemetry Module Specifications:
Size: 33*22*11mm (1.3"*0.87"*0.43)
Weight (with wire): 7g (0.25oz)
Voltage Input Range: 1S~6S LiPo Battery
Compatible receiver: R12DS, R9DS (Old version receiver: R10DS, R10D, R9D)
Compatible transmitter: AT10II/AT10/AT9S Pro/AT9S/AT9
Package List
AT10II Transmitter Mode 2 or Mode 1 x1
Radiolink R12DS Receiver x 1
Radiolink PRM-01 module x1
Mode 1/2 changing parts x 1
Simple user Manual x 1