Rated voltage | 400V,AC | |||||
Operating frequency | 50Hz (60Hz) +/- 10% | |||||
Electrical connection | Three-phase Three wire/four-wire | |||||
Rated Current per Module | 30Kvar,50Kvar, 75Kvar, 100kvar | |||||
Rated Current per Cabinet | 30~600Kvar (module combination) | |||||
Reactive Power Compensation Performance | Cosφ≥0.99 after compensation (if the SVG capacity is sufficient) | |||||
SVG module response time | <5ms | |||||
Active loss of system | <3% | |||||
Reactive Power Compensation Capability | Both inductive and capacitive reactive power compensation | |||||
MTBT | >100,000 hours | |||||
Control characteristics | Controller | DSP IGBT FPGA control | ||||
Parallel Expansion(System) | Up to 10 Racks(4 modules per cabinet) | |||||
Thermal Loss | ≤3% of SVG rated capacity (kVA) | |||||
Communication mode | Modbus Protocol, RS232/485 | |||||
Control connection | Fiber or electrical | |||||
Structural characteristics | Weight | Refer to the model | ||||
Level of protection | IP20 | |||||
Cooling method | Air cooling | |||||
Noise | <50db | |||||
Installation method | Cabinet mounting | |||||
Environmental requirements | Ambient temperature | -20~55℃ | ||||
Relative humidity | Maximum 95%, without | |||||
Altitude above sea level | ≤1,000m |
* Inquiry and consulting support.
* Sample testing support.
* View our Factory.
* Training how to install the machine, training how to use the machine.
* Engineers available to service machinery overseas.