RTV2 Electronic Potting Silicone for Led Matrix Module Manufacturer
RTV2 electronic potting silicone for led matrix module manufacturer
Easy mix with 1:1 proportion
Low viscosity, good flow ability
Room temperature cure or heat up cure
Thermal conduction, flame resistance
Without solvent
RTV2 electronic potting silicone for led matrix module manufacturer
1. Preparing: Clean up the coating surface, remove the rust, dust, oil dirt.
2. Pouring: Weigh the silicone and catalyst correctly, mix silicone part A and part B thoroughly, pour onto the electronic components/surface after vacuum degassing.
3. Curing: Room temperature cure or heat-up cure is both workable.
4. It should be use up after open the package, the material must be kept in a cool place sealed well, and it should avoid from contact with moisture in the air.
Typical general characteristics | Inspection Method | Value |
Product data (Catalyzed A+B) | OTT-D8240 | |
Mix Ratio | A:B | 1:1 |
Color | White/Grey | |
Pot life | 25 °C (77F) | 60-120 mins |
Demold time | 25 °C (77F) | 6-12 hours |
Hardness | Shore A | 40±2 |
Viscosity | mPa·s |
2000±500
|
Thermal conductivity | W/(m.k) | 0.6-1.0 |
Volume resistivity | (Ω.m) | 1013-14 |
Flame-retardant level | / | V-1 |
Shrinkage | % | ≤0.1 |
Features:
1. Almost nil shrinkage
2. Good fluidity, operability and excellent operation.
3. Good resistance to weather, temperature, aging, acid.
4. Excellent tear strength, comfortable duplication times.
5. High chemical resistance to aggressive components of some types of resins
6. Food grade silicone (environmental,odorless and nontoxic)
7. High resistance to high temperature and aging(resist -60 to 200°C)
1. Specialized in rtv2 silicone for 15 years
2. Advanced production and R&D equipment, we have two separated production line and equipment
3. Professional R&D team and experienced QC team
4. Professional sales team, fastest response in 24 hours
5. On time delivery, monthly production reaches 200 tons
6. Professional technical support, both in rtv2 silicone and mould making technology
7. Factory visiting anytime
8. All kinds of certificates, such as MSDS,RoHS etc.
9. OEM service: various size of packages and customized labels
OTT New Material Co., Ltd. was founded in 2014, and it is located in Guangzhou, Guangdong.
We are a leading professional silicone material manufacturer, integrating the R&D, production and sales.
Main products are molding silicon rubber, electronic potting silicone rubber, LED strip light silicone resin powder, human casting silicone rubber, etc over hundreds kind of silicone rubber and related products.
Customers are from all over the world, please feel free to contact us for further information.
Packing : 1KG, 5KG, 20KG, 25KG, 200 KG, 1000KG per drum
Shipping : by air & by sea
Delivery time: within 4-7 days after your payment confirmed in our bank
Storage: Storage in cool, dry places.
Shelf life: 18 months with the original unopened package
1. Do you offer free sample to client?
--Yes, we can provide the sample for test.
2. How to remove the bubbles during my mould making?
--After mixing liquid silicone with curing agent, please put the material into vacuum machine to take off the bubbles.
3. How to get good silicone mould to use longer time?
--The best way is:
#a, Please choose the right liquid silicone according to your products.
#b, Don’t use any silicone oil in mold making, because it can make the silicone mould become too soft to use.
#c, Silicone mould can be used longer after the whole silicone mould fully cured, so it’s better to wait 2 hours after mould finished.
4. Why silicone rubber add curing agent after mixing a lot of bubbles?
--This is normal physical phenomena. The liquid will produce a large number of bubbles in the mixing time, so, it must pass through the vacuum exhaust bubble treatment.
|
|||||||
|