1.Description of RT-830 platinum liquid silicone equivalent to 30 shore dragon skin silicone
RT-830 Silicone rubber is addition cure silicone rubber for silicone products.
The silicone rubber will be cured under room temperature and can be cured fastly by heating,
It’s two components liquid silicone rubber , the mixing ratio is 1:1.
It has an exceptional fluidity and good operability.
Especially ,the platinum cure silicone rubber has a lower shrinkage,higher temperature
resistance and it is food grade.
RT-830 is extremely soft and the viscosity is very lower.
2.Characteristics of RT-830 platinum liquid silicone equivalent to 30 shore dragon skin silicone
*An exceptional fluidity and good operability
*Good tensile strength and tear strength
*Food grade silicone rubber
*High temperature resistance
*Good flexibility*No smell ,non-toxic
*Long shelf-time &lifetime
*Lower shrinkage
3.Application of RT-830 platinum liquid silicone equivalent to 30 shore dragon skin silicone
RT-830 silicone rubber is food grade silicone ruber,it is extremely soft . It is suitable to
make emulational silicone breast pad,sexy dolls, sexy toys, artificial silicone dildo ,
artificial silicone penis,silicone human mask,and many other applications.
4.Datesheet of RT-830 platinum liquid silicone equivalent to 30 shore dragon skin silicone
Item No. | Appearance | Hardness (shore A°) | Viscosity (CPS) | Tensile-strength( kgf /cm2 ) | Tear-strength (kgf /cm2 ) | Elongation-break(%) | Mixing ratio | operation time (25 ℃ ) | Curing time( 25 ℃) | shrinkage |
RT-830 | skin color | 30±2 | 7000±1000 | ≥55 | ≥24 | ≥450 | 1:1 | 20-30 mins | 2~3 h | ≤0.1% |
1. Place a plastic container on a small scale, making sure to zero out the weight on the scale. Note: use a container that, during rise under vacuum in Step 5, will allow for material to expand to 4-5 times its resting volume.
2. Pour catalyst into the plastic container, noting weight of material poured.
3. In the same container, pour an equal weight of base on top of the catalyst (e.g., 100 grams of catalyst and 100 grams base). Note: within a 5% weight variance, the end result is not altered.
4. With a clean, dry mixing spatula, mix energetically until the color of the product is homogeneous. Note: working time begins at this step. Mixing should take no longer than 1-2 minutes.
5. Place container under vacuum and vacuum until material bubbles and rises. Release vacuum and repeat until bubbles are removed. Vacuuming should take no longer than 3-4 minutes.
6. From a height of approximately 30 cm, pour the mixed silicone into the mold frame. Maintain the pouring stream in the same spot so as to minimize introduction of air bubbles into the mold.
7. Allow the mold to sit, undisturbed, for at least 4 hours to ensure the silicone is fully cured.
8. Remove the mold from the frame.
9. Cut around the pattern carefully to release it from the silicone rubber mold.
Notice
The surfaces with which the material comes in contact must be perfectly clean, free of grease and dry.
Close the bottles after use so as not to confuse the cap of the catalyst with that of the base when re-sealing.
Be aware of possible cross-contamination; it’s highly recommended to use only dedicated gear when processing poly-addition RTV2 silicone rubber (including degassing devices).
Be aware that contact with certain material can inhibit the curing of the RTV2 poly-addition silicone rubber. Common contaminants to be avoided include:
-Natural or synthetic rubber, vulcanized with sulphur derivatives.
-Poly-condensation RTV catalyzed with metallic salts.
-PVC stabilizing agents.
-Amine cured epoxies.
-Sulphur, tin and amines derivatives.
-In case of doubt, carry out a small test by pouring the mixture onto a small area of the object.
Packing:
20KG/drum vacuum packing for part A + 20KG/drum vacuum packing for part B
25KG/drum vacuum packing for part A + 25KG/drum vacuum packing for part B
200KG/drum packing for part A +200KG/drum packing for part B
Shipping
Shelf life and transportation
1. Twelve(12) months when stored at 25C in tightly closed original packages.
2. This kind of product is non-dangerous product, which could be transported as general chemicals.
7. Certifacations
8. After-sales Service & Technical Support
Guochuang Silicone provides professional after-sales service and technical support which is our another competitive force to win the market and they are as follows:
1. After-sales service tenet: Fast, Determinate, Considerate, Complete
2. Service quality target: Win the customers' satisfaction
3. Service efficiency: We will make a reponse within 24 hours no matter our products are during the shelf life or not. The satisfaction answer must be prodided within 72 hours
(1) With us your money in safe, your business in safe.
(2) Free sample for testing.
(3) Competitive price.
(4) Strict Q/C (quality of control) management system.
(5) Enough production capacity and timely delivery.
(6) We support customized package and product.
(7) Prompt shipment with professional documents.
(8) Offering professional technical support.
(9) We can make confidentiality agreement with our customs.
(10) We will be here whenever you need.