Electrical Requirements | |||||||
Impedance | 50Ω | ||||||
Frequency | DC-18 GHz | ||||||
Withstand Voltage (at Sea Level) | Flexible Cable | Rigid Cable | |||||
Insulation Diameter1.5 | Insulation Diameter3 | Insulation Diameter1.5 | Insulation Diameter3 | ||||
500V | 750V | 750V | 1000V | ||||
Insulation Resistance | ≥ 5000MΩ | ||||||
Sheltered Effectiveness | straight100 dB,1GHz | ||||||
Contact Resistance | Center Conductor | ≤3mΩ | |||||
Outer Conductor | ≤2.5mΩ | ||||||
Mechanical Requirements | |||||||
Connection Torque | Normal Torque | 0.8-1.1 N.m | |||||
Endurance Distance | 1.7N.m | ||||||
Center Conductor Retention | 0.28N(standard) | ||||||
Vibration | 10m/S2,10-2000Hz,1gn Acceleration | ||||||
Impact | 500m/ S2,1/2 sine wave,11ms,50gn Acceleration | ||||||
Durability | 500cycles | ||||||
Environmental Requirements | |||||||
Temp.Range | -55°C - +155°C | ||||||
Salt Spray | 48h Spray | ||||||
Material | |||||||
Body | Brass | ||||||
Center Conductor | Plug | Brass | |||||
Jack | Beryllium Copper | ||||||
Outer Conductor | Brass | ||||||
Crimp Tube | Brass/ Red Copper | ||||||
Other Metal | Brass | ||||||
Insulator | PTFE | ||||||
Sealing Ring | Silicone Rubber | ||||||
Surface Treatment | |||||||
Body | Gold/Nickle/ Ternary Alloys | ||||||
Center Conductor | Gold | ||||||
Outer Conductor | Gold/Nickle/ Ternary Alloys | ||||||
Other Metal | Gold/Nickle | ||||||
Crimp Tube | Nickle/ Ternary Alloys |
Please contact us immediaterly if you are interested!