DDSY168
Single Phase Prepayment Keypad Electricity Meter
The DDSY168 is a single phase two wire STS compliant prepaid electricity meter finished in a compact, keypad-based BS5685 footprint housing. It miantains the rugged RF immunity withstand of 30V/m and IP54 rating, up to 13KV surge & lightnening protection, and down to 80V operatable voltage, allow it to be installed in very harsh and voltage-tip frequent environment, like Africa and central America continents. The meter is used by residential, light commercial and industrial environments for submetering and tenants metering applications.
Main Features
* 20 digit (Standard Transfer Specification) STS encryption
* Detection of significant reverse energy (SRE)
* IEC62056-21 compliant optical & RS485 port allowing for easy data interrogation
* Disconnects on overload and no credit
* Operate in both prepayment and credit
* Programmable load limit and low credit warning
* Detection and record tamper event such as opening cover, reverse connection, black-out
User Benefit
* Easy connection to User interface Unit (UIU) for split type applications
* PLC/RF/GPRS communication with a head-end AMR/AMI server
* Time of Use (TOU), Muti-tariff, holiday setting.
* Advanced load control and disconnection features
Electricity Parameters: | |
Voltage | |
Nominal Voltage Un | 230V |
Limited Voltage | 70%~120%Un |
Frequency | |
Nominal frequency fn | 50~60Hz |
tolerance | 5% |
Current | |
Basic Current(Ib) | 5A |
Maximum current(Imax) | 80A |
Starting Current(Ist) | 20mA |
Active energy constant | 1600imp/kWh |
Measurement Accuracy | |
Active energy to IEC62053-21 | Class1.0 |
Burden | |
Voltage circuit | <2W <8VA |
Current circuit | <1VA |
Temperature range | |
Operation meter | -25℃ to +75℃ |
Storage | -40℃ to +85 ℃ |
Insulation | |
Insulation Level | 4KV rms 1 min |
Voltage impulse withstand | 8KV 1.2/50 μs |
Insulation System Classification | Protective Class Ⅱ |
Electro Magnetic Compatibility | |
Electrostatic discharge | |
Contact discharge | 8 kV |
Air discharge | 16 kV |
Electromagnetic RF fields | |
27 MHz to 500 MHz typical | 10V/m |
100 kHz to 1GHz typical 30V/m | 30V/m |
Fast transient burst test | 4kV |
Mechanical requirements | |
Meter shell Protection Rate | IP54 |
Insulation System Classification | Protective Class Ⅱ |
Maximum cable size | 8 mm |
Q: Are you a trade company or a manufacturer?
A: We are a original meter manufacturer and solution provide, we can provide more support for you.
Q: Do you provide samples for testing, free or extra?
A: We can provide samples, but we will charge reasonable cost.
Q: What's paypment terms you accept?
A: Paypal/West Union/ T/T / L/C is available. payment ≤USD1000, 100% In advance. payment>USD1000, 30% in advance by T/T, balance payment before shippment.
Q; How long is your delivery time?
A: Generaly it is 5-10 days if the goods is stock, or it is 15-30 days based on your order quantity.