RDF particles pellet machine for sale pine needles portable making

RDF particles pellet machine for sale pine needles portable making

pellet machine introduction:
The environmentally friendly biomass fuel pellet machine of East China Machinery Factory uses the latest hot-pressed ring film granulation technology to form materials without any additives or binders. It is a green and environmentally friendly fuel pellet machine. Waste materials such as residual materials are formed into new environmentally friendly fuels by hot press molding of biomass fuel particles. It is a new generation of less expensive, quicker and more reliable environmentally friendly rich machinery equipment. The new vertical biomass fuel pellet machine of East China Machinery Plant is A new type of environmental protection equipment that solves the current pollution of various environmental resources such as coal burning, coal mine overexploitation, and straw burning pollution transport. The volume after molding is 1/30 ~ 40 of the raw material volume, and the specific gravity is 10 ~ 15 times of the raw material (density: 0.8-1.4). The calorific value can reach 3400 ~ 6000 kcal. It is a solid fuel with high volatile phenol and straw. Use of fuel: The pellet fuel after straw formation is a new type of bioenergy, which can replace firewood, raw coal, fuel oil, liquefied gas, etc. It is widely used in heating, domestic stoves, hot water boilers, industrial boilers, biomass power plants .

This series of pulverizers are widely used in the processing of concentrated particles and various crop straw coarse particless in rural farms, livestock plants, and raw materials crushing in brewing, paper and chemical industries. Not only can they crush grain particless (wheat, Soybeans, corn, dried sweet potatoes, bean cakes, etc.), it can also crush surface roughage (aquatic plants such as grasses, algae lotus, wheat straw, corn stalks, etc., stalks and vines).

Applicable raw materials for pellet machine:

The raw material sources of biomass fuel particles are very wide, such as the waste wood, old wood, wood residues, wood scraps, sawdust, sawdust, wood, wood chips, etc. that are generated during the processing of wood products and the production of wood-based panels. Wood waste such as wood shavings, bamboo shavings, branches, bark, wood bran, sanding powder, wood flour, etc., such as the fruit tree residues grafted from our trees, such as the remaining wood branches and leaves after felling, tung wood, cypress, poplar, Bamboo and wood, such as straw, cotton stalk, wheat straw, corn stalk, chaff, wheat bran, weeds, straw and other materials produced after the harvest of crops can be directly extruded through our environmentally friendly biomass fuel pellet machine No need to add any binder.

Application scope and industry analysis of biomass fuel pellet machine:

There are two major uses of biomass fuel pellet machine, one is high-pressure molding of biomass fuel pellets, and the other is the production of biomass particles pellets:

1: The pellets of the biomass raw material after compacting have large specific gravity and small volume, which are easy to store and transport. They are high-quality solid fuels with high volatility, calorific value> 4500-4800kcal / kg density> 1.1-1.3t / m 3 Light yellow cylindrical φ6- 8mm Ash content ≤ 2% Moisture ≤ 8% Combustion rate ≥ 98% Thermal efficiency ≥ 81% Smoke emission blackness (Lingman class) <1 Dust emission concentration ≤ 80mg / m 3, with flammability, ash It has the characteristics of low cost and low cost. It can replace fuels such as firewood, raw coal, and gas. It is widely used in civil heating, domestic stoves, hot water boilers, industrial boilers, biomass power plants and other companies to replace coal burning and solve environmental pollution;

2: After the biomass material is formed, the particles are uniform, smooth, round, high strength, and good fluidity. It is widely used in RDF husbandry and aquaculture such as sawdust, duck, peanut shells, hay, goose, pig, bark, sheep, pigeon, bird particles, etc. The use of large, medium and small breeding plants and particles plants is widely used in brewing, sugar making, paper making, medicine, tobacco factories and other industries. Due to the special pellet forming method of biomass pellet machines, the finished pellets are widely used in various industries. World, chemical industry, the first choice of ideal granulation equipment.

Process flow of fuel pellet machine:

Raw material acquisition → crushing → drying → screening → centralized particlesing → quantitative particlesing → ring film extrusion molding → cooling and heat dissipation → quantitative bagging → finished product storage → bulk sales

Working principle of fuel pellet machine:

The material is fed to the discharge port by the quantitative particleser, and naturally falls to the rotating pressure roller. Under the high-speed rotation of the movable pressure roller, physical crushing methods such as wheel rolling and extrusion are formed. Under high-speed collision, the material will quickly spread to the periphery. To the die, after reaching the set capacity, the material reaches the softening point, extruded through the die and the pressure roller, extruded through the die hole, the extruded biomass particles will naturally sag to the silo after a certain length, thus completing the environmental protection granulation Purpose.
Fuel pellet machine composition:

This machine is composed of quantitative particleser, particles opening, movable pressure roller, mold, main shaft, conjoined hollow shaft, box, base, transmission device, dust collector and other components.

Fuel pellet machine features:                  
                    
1: High particle hardness, smooth surface, and sufficient internal maturity, which can improve nutrition and facilitate digestion and absorption, and can also kill general pathogenic microorganisms and parasites, and can obtain higher economic benefits than mixed powdered particles;

After high pressure molding, the water content is low, which is more conducive to storage;

2: The density of the raw materials is generally about 110-130kg / m3, and the density of the particles after molding is greater than 1100kg / m3, which is extremely convenient for transportation and storage. At the same time, its combustion performance is greatly improved;

3: Heat-treated high-quality alloy steel pressure roller, strong fatigue resistance, low failure rate, continuous production, economic and durable;

4: Carburizing treatment mold, high compression resistance, low wear rate;

5: The dust removal system was added during the internal design of the device, the noise is low, the maximum noise is less than 72 decibels, and there is no smoke and dust;

6: Simple design, strong structure, strong adaptability and small footprint.

Technical parameters of biomass fuel pellet machine:

The interests of the customer is our first consideration, our service pursuit refinement, strong design, development,
manufacturing, installation, debugging and technical maintenance, each link has made careful arrangements, to solve the customer a
series of worries.

 The company officially registered on 27th Feb. 1995and set up factories in Gongyi City, Henan Province , since then, our factory made from crushing, molding, drying, sorting, cleaning, recycling equipment and other mechanical equipment, accumulated experience day by day.In 20 years our plant not only accumulated core technology of crushing, molding, drying, sorting, cleaning recycling equipment but also learned openness basing on sincerity. Over the years , East China Machinery Factory` machinery and equipment products are exported to Russia, Australia, Brazil, Argentina, Italy, Chad, Uzbekistan, , Myanmar, Vietnam, Indonesia, , India, Chile, Mali, Guinea, Tanzania, Kenya, Nigeria, the Philippines, Bangladesh, , Japan and countries and regions, renowned in the international market.