HNC-R-BR625 Double rotation robot with working radius 1849.5mm and load 25KG for assembly load unload handle stamp drill center
BR625, as the "Hercules" in the double-rotating robot, has a large payload of 25KG and an effective working radius of 1849.5mm. It also meets the dual requirements of high load and long working radius. It has an ultra-long arm span, and flexible operation of large loads. All-round detection, no operating blind spots, combined with a flexible double-spin structure design, can avoid small space restrictions and truly achieve the purpose of improving product quality. BR625 is easy to operate, low power consumption, and can be quickly deployed. The hollow arm design, built-in cables and air pipes, can make the working environment cleaner and safer. BR625 is especially suitable for assembly, loading and unloading, handling, stamping, densely arranged drill center and other configurations, and the cost performance is very high.
1. Lightweight design, 210KG body weight, 25KG flexible handling can be realized;
2. The double-rotation structure can avoid the restriction of being unable to work in a small space;
3. Beat time period to meet higher-speed operation rhythm;
4. Hollow arm design, with cables and trachea built into it, which is safer;
5. High cost performance, positioning as a popular 25KG robot.
Industrial robots. |
HNC-RBR625 |
|
Freedom. |
6 |
|
Load. |
25Kg |
|
Maximum working radius. |
1849.5mm |
|
Repeat positioning accuracy. |
±0.05mm |
|
Range of motion. |
J1 |
±160° |
J2 |
-178°/-2° |
|
J3 |
+128°/+412° |
|
J4 |
±360° |
|
J5 |
±131° |
|
J6 |
±360° |
|
Rated speed. |
J1 |
2.44 rad/s,140°/s |
J2 |
2.46rad/s,141°/s |
|
J3 |
2.98rad/s,171°/s |
|
J4 |
3.92rad/s,225°/s |
|
J5 |
3.92rad/s,225°/s |
|
J6 |
3.92rad/s,225°/s |
|
Maximum speed. |
J1 |
4.06rad/s,233°/s |
J2 |
4.10ad/s,235°/s |
|
J3 |
4.97rad/s,285°/s |
|
J4 |
8.49rad/s,487°/s |
|
J5 |
8.49rad/s,487°/s |
|
J6 |
8.49rad/s,487°/s |
|
Allow moments of inertia. |
J6 |
2.0kg^2 |
J5 |
3.7kgm2 |
|
J4 |
3.7kgm2 |
|
Allow torque. |
J6 |
40.9Nm |
J5 |
79.8Nm |
|
J4 |
76.5Nm |
|
The applicable environment. |
Temperature. |
0~45° |
Humidity. |
20%~80% |
|
Other. |
Avoid contact with flammable and explosive or corrosive gases and liquids away from electronic noise sources (plasma) |
|
The length of the teachr cable. |
8 meters. |
|
Body-cabinet connector length. |
6 meters. |
|
I/O parameters. |
Numbers: 32 inputs (NPN PNP available), 31 outputs (NPN) |
|
The body reserves the signal line. |
24-bit (aeronautical plug connection) |
Case 1:High speed stamping automation line
Handling. It occupies only the area of the base, easily realizing high-speed turning of the workpiece. The standard handling time for 1800mm can reach 5s including cycle and turnover, and the standard handling time can reach 3s without turnover.
Case 2:Sorting in logistics+ 3D Vision
Under the same arm length, the cost is 50% of foreign models, but the speed is faster. The sorting time is as fast as 3.5s with 3D vision operations.
Case 3:Loading and unloading in drilling-tapping center
Small space is used and the movement is very flexible. It is specially designed for CNC high-speed drilling center. With the internal rotating structure, it easily realizes the connection or transportation in the event of 600 of spacing with the fastest speed and excellent avoidance.
Case 4:Lathe industry
Case 5:Laptop industry
Case 6: Automobile industry
Wuhan Huazhong Numerical Control Co., Ltd. (Hereinafter refered to as HCNC)
was established in 1994 with a registered capital of 172,79 million yuan and its history could be dated back to 1950s.
HCNC is a high-tech enterprise which specilizes in R&D, production, sales of CNC system, industrial robot, ir themal imager, new energy vehicle.
HCNC was successfully listed on the GEM with Stock Code 300161 in 2011.
HCNC was granted one of national first batch of 91 Innovative Enterprises by Ministry of Science and Technology and State-owned Assets Supervision and Administration Commission of the State Council.