RAS system oxygen cone equipment for shrimp prawn lobsterling
Introduction
Oxygen cone is a kind of equipment to dissolve oxygen in water. It's body using FRP high strength material. Obvious effects of increasing oxygen than similar products. With pure oxygen generating equipment (or oxygen bomb) and other circulating water aquaculture, aquaculture of ultrahigh density may be provide high dissolved oxygen water.
Oxygen cone is made of glass fiber reinforced plastic (high strength glass fiber composite resin) spray melting winding. Present the small under large pyramidal structure. In and out of the water use PVC flange connection. The bottom outlet and the observation window.
Oxygen cone is a special kind of pressure vessel. Its main function is under the condition of gas-liquid mix, increasing pressure to force to overcome the surface tension of the water gas and passive dissolution. So oxygen cone to form a complete set of equipment, such as booster pump, jet device to use. Air using oxygen generator and oxygen bomb oxygen purity (greater than 90%)
Features:
1- Glass fiber reinforced plastic material
2- High dissolved oxygen rate
3- Easy installation and maintenacne
Specification
Model |
Specification |
Diameter of Flange Inlet / output |
Designed Maximum water flow |
Measuring air pressure (PSI) |
Dissolved oxygen rate under temperature 20℃ ( KG/H) |
Dissolved oxygen concentration of water outlet (mg/L) |
OGP-8 |
Φ400*1050 |
2”/63mm |
8 |
20 |
1 |
65 |
OGP-10 |
Φ400*1300 |
2”/63mm |
10 |
20 |
1 |
65 |
OGP-12 |
Φ500*1200 |
2”/63mm |
12 |
20 |
1.2 |
65 |
OGP-15 |
Φ600*1520 |
2”/63mm |
15 |
20 |
1.2 |
65 |
OGP-25 |
Φ700*1700 |
3”/90mm |
25 |
20 |
1.5 |
65 |
OGP-30 |
Φ800*1900 |
3”/90mm |
30 |
20 |
1.8 |
65 |
OGP-35 |
Φ850*2250 |
3”/90mm |
35 |
20 |
2 |
65 |
OGP-50 |
Φ900*2100 |
4”/110mm |
50 |
20 |
2.4 |
65 |
OGP-60 |
Φ1000*2500 |
4”/110mm |
60 |
20 |
3.5 |
65 |
OGP-110 |
Φ1000*2720 |
4”/110mm |
110 |
20 |
3.9 |
65 |
OGP-120 |
Φ1100*2700 |
5”/110mm |
120 |
20 |
4.5 |
65 |
OGP-140 |
Φ1200*3000 |
5”/110mm |
140 |
20 |
5 |
65 |
3~150LPM Fish Farm (High pressure ) Oxygen Concentrator With Oxygen cone
Specification of 3~60L Oxygen Concentrator
Model |
OGP-03LB |
OGP-05LB |
OGP-10LB |
OGP-15LB |
OGP-20LB |
OGP-30LB |
OGP-40LB |
OGP-60LB |
|||||
Working voltage |
110V/220V/380V |
||||||||||||
Power |
300W |
500W |
1000W |
1500W |
1500W |
2000W |
3000W |
4000W |
|||||
Oxygen output |
3L/min |
5L/min |
10L/min |
15L/min |
20L/min |
30L/min |
40L/min |
60L/min |
|||||
Concentration |
≥93% |
||||||||||||
Temperature |
0-35℃ |
||||||||||||
Relative humidity |
≤70%±10% |
||||||||||||
Noise |
≤ 65Db |
||||||||||||
Size cm |
32*35*60 |
37*60* 96 |
40*80*115 |
56*96* 115 |
60*80*125 |
60*100*125 |
|||||||
Oxygen outlet pressure (Mpa) |
0.05 |
0.05 Mpa ~0.3Mpa |
|||||||||||
Net Wight |
29KG |
31KG |
55KG |
100 KG |
100 KG |
145 KG |
190 KG |
230 KG |
|||||
Housing |
Carbon steel sprayed with plastics |
||||||||||||
Packing |
Wooden case |
Specification of 70~150L Oxygen Concentrator
Model |
OGP-70LB |
OGP-80LB |
OGP-90LB |
OGP-100LB |
OGP-150LB |
Working voltage |
110V/220V/380V |
||||
Power (KW) |
5.3 |
6 |
7 |
7.7 |
11.2 |
Oxygen output (L/min) |
70 |
80 |
90 |
100 |
150 |
Refrigerated air dryer (m3/Min) |
≥2.5 |
≥3.5 |
|||
Concentration |
≥93%+_3 |
||||
Temperature |
0-35℃ |
||||
Oxygen dew point |
—40℃ |
||||
Relative humidity |
≤70%±10% |
||||
Noise |
≤ 60Db |
||||
Size cm |
145*120*152 |
160*120*170 |
210*120*170 |
||
Oxygen outlet pressure (Mpa) |
0.2MPA |
||||
Oxygen outlet |
G1/2 |
||||
Net Wight (KG) |
300 |
330 |
350 |
370 |
450 |
Housing |
Carbon steel sprayed with plastics |
||||
Packing |
Oxygen Injector With Oxygen Cone For Dissolving Oxygen In Water
Oxygen Source Ozone Generator With ORP Meter Control For Fish Farm Water Treatment
0.1~500T UV sterilizer For Fish Farm Water Treatment