Air Cooled Modular Water Chiller and Heat Pump with Axial Fans, Scroll Compressors,
Water Pump and Storage Tank
IHAW(H) Series R-410a Version
Cooling capacity 600kw-1000kw
FEATURES
STRUCTURE
Panels and base frame are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.
HERMETIC COMPRESSORS
Single phase (models.05~10) compressors, 3-phase scroll compressor (models.12.5~30), with thermal overload cut-out and crankcase heater mounted on rubber vibration isolators.
Models 7~10 are available also with 3-phase scroll compressor and models.12.5 with single phase scroll
compressor.
AXIAL FANS
External rotor type axial fans, equipped with single phase direct drive motors, low noise 6 poles, protection level IP54, provided with a protective outlet grille.
EVAPORATOR
High efficiency stainless steel brazed plate heat exchanger, factory insulated with flexible close cell material.
CONDENSER
Coils are consisting of seamless copper tubes mechanically expanded into blue hydrophilic aluminum fins, protected with flexible plastic grill.
REFRIGERANT CIRCUIT
Copper tube connection with charge valve, filter drier (filter for models. 05~8.5), gas-liquid separator, thermostatic expansion valve (expansion capillary tubes for mod. 05~8.5), low pressure switch with automatic reset, high pressure switch with manual reset. The heat pump unit is completed also with 4-way valve, liquid receiver and one-way valve.
HYDRONIC CIRCUIT
Built with air vent valve, water drain connection, water circuit safety valve, water pump, male-threaded hydraulic connectors and inertial water storage tank.
ELECTRIC PANEL
consists of: Compressor contactor; Water pump contactor; Compressor protection breaker; Water pump protection breaker Fan motor protection breaker; Control circuit protection breaker; Phase sequence relay (only for 3-phase power supplied units); Fan speed regulator (Optional); Programmable microprocessor controller;
SPECIFICATIONS