Attention
1: before removing the tire and installing the tire, it is necessary to evenly smear the tire pulling cream at the tire orifice, otherwise it is easy to hurt the tire orifice.
2: before the tire removal, use the gap, the tire removal shovel will be turned up, the tire removal rod as far as possible to press down, so that the shovel head and the rim have 0.5CM gap, the purpose is to prevent damage to the rim, while reducing the resistance of tower removal without damaging the equipment.
3: Before the tire removal operation begins, the motor should be controlled to rotate the motor gently in the opposite direction of the tire removal (the purpose is to make the tire opening stretch and not hurt the tire opening) and then the tire removal operation should be carried out.
4: tire replacement machine can not be soaked in rain or blisters, otherwise the motor is prone to circuit failure or burn. Remote control can not be exposed to the sun and rain, moisture, or easy to malfunction.
5: before using the tire changer, the power supply must be installed leakage protector (remember!)
6: Tire replacement machine use 220V or 380V power supply, external power line should use more than 4㎡ power supply, the length is not more than 30m, the use of voltage must reach 220V or 380V.