Quick open closure gas filter separator
When the gas contains both solid particles and liquid particles, it is necessary to use a filter separator to remove it. Filtration separators generally refer to solid impurities in the filtered gas and liquid particles in the separation gas. These separators are used for a wide range of applications, including the removal of lubricating oil from process gases and the removal of impurities in the natural gas pipeline upstream of a pressure regulating station.
Working Principle
The working process of this filter separator is divided into three phases:
The first stage: the use of gravity separation principle - this phase of the flow from the inlet pipe into the separator tube, the impact of gas on the surface of the cylinder or filter support the gas flow rate is reduced, the particles affected by gravity are separated out.
The second stage: the use of filter filter principle - this stage has a number of replaceable and washable filter elements, its purpose is to remove the smallest solid particles, and condensed into a mist so that it is maximized in the third stage Remove it.
The third stage: Using the principle of blade separation - This stage is a set of blade separators whose purpose is to remove liquid particles and the separated dirt is collected in the separator reservoir bag.
1. Allow Maximum Working Pressure: 9.9Mpa
2. Working Temperature: -20~+60℃
3. Large Filter Area, Low Pressure Loss, Easy Cleaning
4. Collecting Liquid (dust) Cavity with Discharge Valve
5. With Differential Pressure Gauge Interface, Differential Pressure Table Filter Head Can Be Installed with Quick Start Structure, Which Can Quickly and Easily Open and Close the Filter
6. Cleaning, Replacement of Filter is More Convenient
7. Connection: 180 Degrees Straight or 90 Degree Right Angle
8.Flange Standards: HG/T 20592~20615, GB/T 9115~9119, ANSI B16.5
Filter Element
Material: Stainless Steel Screen and Felt Polyester
Filter Accuracy: 5μm, 10μm, 20μm, 50μm
Filter Efficiency: Reach 99.9%
Filter Element Type: G1.0-G1.5-G2.0-G2.5-G3.0-G4.0-G4.5-G5.0-G6.0-G8.0-G10-G12
Type | DN | PN | Diameter mm | Main Size | ||
L | h | H | ||||
YGJ-150 | 150 | 1.6~10MPa | 426 | 2550 | 1200 | 1665 |
YGJ-200 | 200 | 1.6~10MPa | 426 | 2560 | 1200 | 1680 |
YGJ-250 | 250 | 1.6~10MPa | 620 | 2700 | 1200 | 1715 |
YGJ-300 | 300 | 1.6~10MPa | 700 | 3115 | 1300 | 1900 |
Leshan Chuantian Gas Equipment Co,.Ltd. is located in Leshan industry district, Sichuan province, with over 30 years experiences at gas equipment field and area over 40000 m2 plant. We have more than 280 workers and 80 technicians. With the professional technical research capability, Chuantian company is specialized in design, manufacturing, sale of gas regulator equipment, pry-mounted station, LNG gas station, LNG bottle group station, CNG pressure reducing station, gas regulator, security protect device, gas purifying equipment, heat transfer equipment.
Our sale network spread all over the country and exporting to abroad. We are high quality supplier of China National Petroleum Corporation, China Petroleum& Chemical Corporation, China Resources Gas, PetroChina Kunlun Gas Ltd, Shenzhen Gas Corporation Ltd, Chengdu City Gas, Chongqing Gas Corporation Ltd. As good quality and service to became each gas group’s training base for regulator equipment care and maintenance, set up good industry brand position.