The series of hydraulic tubing power tongs adopt inner cam rolling-up clamping mechanism, with a hydraulic backup tong. It is an ideal tool for makeup or breakout of various of tubings, and small sizes of casings and drill pipes in workover operation. The power tong with extra long rod is available for backup tong to grip tubing body. The power tong also can be equipped with automatic torque control system.
Model XQ89/3YC Hydraulic Power Tong is a special device for Well Service, which is used to make up and break out tubing thread. It
is a improved new product based on Model XQ89/3B hydraulic power tong. Driving by hydraulic motor with low speed and large torque,
model“H”manual control valve simply matching with oil motor. It’s a lighter hydraulic power tong for well service .
This product has the following features.
* The tong head uses inner curved roller climbing and cliping mechanism and needn’t to change any part during making up or
breaking out the tubing thread which diameter is “27/8″”or“31/2″”.
* Two shifts provides high speed at the high gear and large torque at the low gear.
* The brake mechanism is on the upper and so it is easy to adjust and repair.
* The new type hydraulic Backup tong and master tong form a combined tong . Operating the manual control valve of master tong,
the combined tong clipping and unloosing simultaneously.
* The adequate torque will be gained during making up and breaking out the various steel tube by adjusting pressure of oil .
* This product has owned several patents of China.
Model | XQ89/3YC | XQ114/6YB | XQ140/12Y | XQ140/20 | XQ140/30 | XQ194/40 | ||
mm | 60-89 | 60-114 | 73-140 | 42-140 | 42-140 | 42-194 | ||
Applicable range main tong | in | 23/8~31/2 | 23/8~41/2 | 27/8~51/2 | 1.66~51/2 | 1.66~51/2 | 23/8~75/8 | |
mm | 60-114 | 73-141.5 | 89-156 | 60-153.7 | 60-153.7 | 60-215.9 | ||
Applicable range backup tong | in | 23/8~41/2 | 27/8~51/8 | 31/2~61/8 | 23/8~6.05 | 23/8~6.05 | 23/8~81/2 | |
N.m | 3300 | 6000 | 12000 | 20000 | 30000 | 40000 | ||
Max. torque | ft.lbf | 2213 | 4425 | 8850 | 15000 | 22500 | 30000 | |
Speed | rpm | 30-90 | 20-85 | 14-72 | 13.5-58 | 9-40 | 5.9-25 | |
Rated pressure | Mpa | 10 | 11 | 12 | 17.5 | 17.5 | 17.5 | |
psi | 1450 | 1595 | 1740 | 2500 | 2500 | |||
Max.oil supply | L/min | 80 | 100 | 120 | 140 | 140 | 140 | |
gpm | 21 | 26 | 32 | 38 | 38 | 38 | ||
size | mm | 650×430×550 | 750×500×600 | 1024×582×539 | 1115×962×1665 | 1180×1000×1665 | 1400×1190×1935 | |
in | 25.6×16.9×21.7 | 29.5×19.7×23.6 | 40.3×22.9×21.2 | 44×38×65.3 | 46.5×38×65.3 | 55×47×76 | ||
Weight(c/w backup tong) | kg | 158 | 220 | 480 | 840 | 860 | 1180 | |
lb | 348 | 485 | 1060 | 1840 | 1910 | 2600 |
1) How can I place order?
A: You can contact us by email about your order details, or place order on line.
2) How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T and Western Union are the most usual ways we are using.
3) What's the order procedure?
A: First we discuss order details, production details by email or TM. Then we issue you an PI for your confirmation. You will be requested to do pr -epaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 15-25days if we don't have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.
4)How do you take care when your clients received defective products?
A: replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.
5)How do you check all the goods in the production line?
A: We have spot inspection and finished product inspection. We check the goods when they go into next step production procedure.