1 x 0.8Kw 220V ER11 Quanlity Air-cooled spindle motor(24000rpm,Φ65mm,4 bearing,400Hz)
Hi, Welcome to our shop. This item has stock in Germany,Russia,Ukraine, and USA warehouse. Can be shipped directly from Russia, Ukraine, Germany and USA, Free VAT, and fast shipping , ship by DHL/ Deutsche Post / IML /UPS etc..Any question,pls feel free to contact me.Tks.
Specification:
Material:Stainless Steel
Size:Φ65mm
Power:0.8Kw
Voltage:220VAC
Current:4A
Frequency:0-400Hz
Speed:10-24000rpm
Cooling:Air-cooled
Runout off:Less than 0.01mm
Precision tapered bore:Less than 0.005mm
Bearing Lubrication:Grease
Collet size:ER11
Bearings:4 Ceramic bearing
Net Weight:2.85kg
Power supply interface:Professional aviation Interface, Interface 1234 marked 123 respectively connected to the inverter output end of the (U, V, W), 4 ground wire this interface must be safe ground.
Main application:Wood, Aluminum, Stone, metal, glass, PVC industry
1. Structural features
1) High speed electric main bearing all adopt the Ceramic bearing, axis sets of loading, Improve spindle in the high-speed rotation supporting stiffness and precision grinding.
2) Before driving, rotation of the shaft by hand.Spindle high speed rotation caused by temperature rise, use of cooling liquid circulating system to eliminate.
2. Instructions for use
1) In use, must first connect the cooling water pipe, make spindle connect cooling water and then start.
2) Before driving, turned by hand spindle. If sensory block is not flexible, you should troubleshoot, and then check the direction of rotation of the spindle from the spindle end to see if the match should rotate counterclockwise power wiring should be changed to make it consistent.
3) Before driving, cooling water for grinding workpiece can’t be in the front end of the spindle cover, to prevent the front bearing cover slot inlet burning motor and bearing. the motor must not enter the water, after turned on of the motor, when you live in grinding the workpiece to open the grinding of workpieces coolant. First off the workpiece coolant shutdown, and then close the spindle motor.
3. Maintenance and Service
1) Motorized spindle by medium frequency power supply rated voltage, frequency should be consistent with electric spindle technology parameters, motorized spindle rotational speed can change the frequency to adjust, also directly proportional voltage change.
2) When the spindle is temporarily not in use, should use compressed air to blow the coolant water,to avoid rusting, plug the hole. Spindle surface should be coated with anti rust oil. The shaft end protecting device, placed in dry place.
3) If replacement the spindle of bearings, best professional and technical personnel from the replacement. Use special tools, stator coil does not to be removed.
1.Q:Can I get any sample firstly before place order?
A:Of course, we are honored to offer you samples for your check.
2.Q:Do you have the products in stock?
A:Each of our products has a regular quantity of stock in the warehouse, if the order quantity is not large, it can be shipped directly. If you need more, please contact us to verify the delivery date, thank you.
3.Q:What's the delivery time?
A:It usually takes about 5-7 work days, There will be a slight gap between specific products and quantities.
4.Q: How does your factory do regarding quality control?
A: Quality is priority. We always attach great importance to quality control from the beginning to the end of the production. Every product will be fully assembled and carefully tested before packed.
5.Q:What's your warranty terms?
A: We offer different warranty terms for different products. Please contact with us for details.